Need door handle

Post by **Don Merzavez** » 16 Nov 2009 11:00 am

i need door handle (front, drivers side, outdoor) for my 360 GL 4-door sedan
Can anyone help me?
P.S. Delivery to Russia....

Post by **Speedy88** » 16 Nov 2009 01:00 pm

It'll be the same on all 300s. There's none on ebay, hopefully someone has a spare one

Post by **Don Merzavez** » 16 Nov 2009 01:22 pm

I found the one on ebay, but it is a whole mechanism(and it not cheap!!!), then i need only a handle.
http://cgi.ebay.nl/TURGRIFF-GRIFF-VL-TU ... 5636386234

Post by **kds19** » 16 Nov 2009 01:26 pm

are you sure you need a handle and its not just a rod has disconnected as thats quite a common problem?
nd is the car left hand drive or right hand drive?
cheers
kev

Post by **trabitom99** » 16 Nov 2009 04:23 pm

A very common problem with the door handles is this piece breaking:

It then seems as if the door is locked, when it's not.

"Tver, Russia" sounds like LHD

Cheers

Tom

Post by **340GLT** » 16 Nov 2009 04:46 pm

I have a few of these. Drop me a PM and i will dig it out for you. LHD Drivers side yeh?
Adam

Post by **Chris_C** » 17 Nov 2009 12:07 am

There is a few common failures on these, one of which is the pin just next to where Tom circled coming out. On the plus side, they are 23 notes new in the UK, so translate to your favourite currency

Post by **Don Merzavez** » 17 Nov 2009 06:08 pm

kds19 wrote:are you sure you need a handle and its not just a rod has disconnected as thats quite a common problem?
nd is the car left hand drive or right hand drive?
cheers
kev

Unfortunately - sure. The handle is broken. When I tried to open the door - the piece of handle left in my hand (exactly the plate for holdind it).
The Car is LHD.
Volvo number of this part is 3287913

Post by **Ronnie** » 17 Nov 2009 06:10 pm

The alloy is brittle - I've had a couple of V300 door handles snap in my hands. I wouldn't bother trying to swap in a new handle only, just replace the whole mechanism. It's a fiddly enough job as it is without making it harder for yourself.

Post by **Don Merzavez** » 17 Nov 2009 06:13 pm

Ronnie wrote:The alloy is brittle - I've had a couple of V300 door handles snap in my hands. I wouldn't bother trying to swap in a new handle only, just replace the whole mechanism. It's a fiddly enough job as it is without making it harder for yourself.

May be you are right. Can someone help me with a whole mechanism with a reasonable price?

Post by **MCHUDD** » 19 Nov 2009 11:36 am

Hi Don.
I have a working door handle. The one you need.
However,i donn't know how much it would cost to post to Russia.
Cheers Mark.

Post by **Don Merzavez** » 19 Nov 2009 03:25 pm

maybe Royal mail can help?
I'll pay for delivery, no problem.
how much do you want for your handle?
the royal mail prices for delivery are : http://www.royalmail.com/portal/rm/cont ... tId=400034 (7 pounds, i mean)

Post by **MCHUDD** » 19 Nov 2009 04:36 pm

Hi don.
I wont be able to get it of the car untill next tuesday as my spares car is parked up
at my mates house.I will get back to you when i have it.
Cheers Mark.

Post by **Don Merzavez** » 24 Nov 2009 03:27 pm

So, tuesday. What about handle?

Post by **MCHUDD** » 24 Nov 2009 04:58 pm

Hi don.
I managed to get the handle today.
you can have it for £15.00 plus postage.
I will take it to the post office tomorow and see what it costs and let you know.
Cheers Mark.

Need door handle

Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle

Re: Need door handle