Bolt pattern and ET on Volvo/DAF 66 wheels?
-
- Posts: 213
- Joined: 07 Mar 2005 01:12 am
- Location: Tampere, Finland
Bolt pattern and ET on Volvo/DAF 66 wheels?
Checked out all the books but didn't find any confirmation.
Anyone have knowledge on this?
Anyone have knowledge on this?
Volvo 66 GL 1975
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
-
- Posts: 213
- Joined: 07 Mar 2005 01:12 am
- Location: Tampere, Finland
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
Nope. 66 has a 3 bolt pattern.
Volvo 66 GL 1975
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
-
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
No, it's 3 x 125mm PCD, nothing similar to Renault or Peugeot. It's a DAF oddity. It'll be 10 days before I can tell you the ET, the stud hole diameter and the hub hole size. (In Glasgow at present, all my books are Dublin)volvodspec wrote:3x 108
Here's the page from the DAF 66 factory manual I made earlier :
Volvos had "Marathon" spec steel rims.
Various alloys were made. Most recently the DCN had Minilites made with the custom drilling. Other old stuff can be found here
Tero, Can I ask why you want this information?
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
bolt pattern is 3x108, pcd is 125.
bolt pattern is the distance between the bolt holes
PCD is the diameter of the circle which passes through the centre of all the bolt holes
bolt pattern on a 3x108 rim has a pcd of 125
bolt pattern is the distance between the bolt holes
PCD is the diameter of the circle which passes through the centre of all the bolt holes
bolt pattern on a 3x108 rim has a pcd of 125
-
- Posts: 213
- Joined: 07 Mar 2005 01:12 am
- Location: Tampere, Finland
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
Why I want this information? My car where I could measure these is away at the museum (70 miles).
I'm thinking of buying a project car and thought of the minilites.
If I buy a project car I could do all the pervert modifications that I just couldn't do on previous one.
What other cars have 3x108? Peugeot 106 has 3x98? Renault 5, Citroen Visa have 3x108?
Peugeot 304's have 3x108?
The ET's a mystery
Basically I would like to tune up the engine&chassis and make the wheels larger and wider. Perhaps 6x14" alloys with 195/60R14 tires.
Just searching for the alloys before putting my money on the car.
I'm thinking of buying a project car and thought of the minilites.
If I buy a project car I could do all the pervert modifications that I just couldn't do on previous one.
What other cars have 3x108? Peugeot 106 has 3x98? Renault 5, Citroen Visa have 3x108?
Peugeot 304's have 3x108?
The ET's a mystery
Basically I would like to tune up the engine&chassis and make the wheels larger and wider. Perhaps 6x14" alloys with 195/60R14 tires.
Just searching for the alloys before putting my money on the car.
Last edited by Tero Huikko on 27 Dec 2009 05:39 pm, edited 2 times in total.
Volvo 66 GL 1975
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
Citroën AX
Citroën Saxo (some models)
Peugeot 106
thats all I can find in 3x108.
Citroën Saxo (some models)
Peugeot 106
thats all I can find in 3x108.
-
- Posts: 213
- Joined: 07 Mar 2005 01:12 am
- Location: Tampere, Finland
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
Early saxos and 106 had 3x98
Volvo 66 GL 1975
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
hmmm, the info on the website I was looking at must have been incorrect then.Tero Huikko wrote:Early saxos and 106 had 3x98
-
- Posts: 213
- Joined: 07 Mar 2005 01:12 am
- Location: Tampere, Finland
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
Volvo 66 GL 1975
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
well if it would be a project car, why not a converion to 4 stud with 4x100 pattern?Tero Huikko wrote:If I buy a project car I could do all the pervert modifications that I just couldn't do on previous one.
Basically I would like to tune up the engine&chassis and make the wheels larger and wider. Perhaps 6x14" alloys with 195/60R14 tires.
-
- *** V3M DONOR ***
- Posts: 9143
- Joined: 11 Nov 2008 04:22 pm
- Location: Newcastle Upon Toon
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
Or 4x108 if you want cheap minilites.volvodspec wrote:well if it would be a project car, why not a converion to 4 stud with 4x100 pattern?Tero Huikko wrote:If I buy a project car I could do all the pervert modifications that I just couldn't do on previous one.
Basically I would like to tune up the engine&chassis and make the wheels larger and wider. Perhaps 6x14" alloys with 195/60R14 tires.
-
- Posts: 213
- Joined: 07 Mar 2005 01:12 am
- Location: Tampere, Finland
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
Why's that?Or 4x108 if you want cheap minilites.
Volvo 66 GL 1975
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
Volvo 66 GL 1977
Volvo 440 DL 1994
Volvo V50 1.6DRIVe 2009
Volvo V90 Business D3 AWD 2017 (Not arrived yet)
Mercedes-Benz 190E 1992
Oldsmobile Omega 2.8 V6 1981
-
- Posts: 1921
- Joined: 06 Dec 2008 09:35 pm
- Location: Netherlands.
- Contact:
Re: Bolt pattern and ET on Volvo/DAF 66 wheels?
well i've heard that the front wheel bearing of a d66 is the same as a v3s one, so that would mean just swapping the hub over and possibly fabricate a bracket for the caliper.
i believe that if you take apart a v3s rear beam you might be able to do the same trick converting it to 4x100
i believe that if you take apart a v3s rear beam you might be able to do the same trick converting it to 4x100