Lowering blocks and super stiff shocks fitted

Post by **Nikdev** » 09 Feb 2010 04:00 pm

valman wrote:
volvodspec wrote:4 straight bolts a side.
great, makes things much easier. just need the size then i guess

M10 i think(or m12), and you need longer ones when you you put in a block, measure the standard ones and just add up the block hight

Post by **volvodspec** » 09 Feb 2010 04:45 pm

yep, M10 with 8.8 grade

i believe original ones are 45mm long but don't trust me on that

Post by **valman** » 09 Feb 2010 06:11 pm

good stuff guys. will be going to russia on saturday you see. and stuff like this is cheap as chips there

Post by **volvodspec** » 09 Feb 2010 06:15 pm

just make sure the bolts are at least 8.8 grade!!!

Post by **valman** » 09 Feb 2010 07:53 pm

volvodspec wrote:just make sure the bolts are at least 8.8 grade!!!

will do, cheers