Heat shield for down pipe exhaust on volvo 360 GLT

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
kelvingenders
Posts: 463
Joined: 12 Apr 2010 08:40 am

Heat shield for down pipe exhaust on volvo 360 GLT

Post by kelvingenders »

Does anyone know what might happen if this is left of the car. It's the one situated below/past the exhaust manifold :360:
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: Heat shield for down pipe exhaust on volvo 360 GLT

Post by Chris_C »

I think you mean the one by the PAS? It's to keep the PAS fluid cooler
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
kelvingenders
Posts: 463
Joined: 12 Apr 2010 08:40 am

Re: Heat shield for down pipe exhaust on volvo 360 GLT

Post by kelvingenders »

I have no power steering, probably protects vibration damper
Ride_on
Posts: 2266
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Heat shield for down pipe exhaust on volvo 360 GLT

Post by Ride_on »

There are 2 types, a big one for PAS and an smaller one for non-PAS. I know in non-PAS a friend let his off for an extended period and his steering eventually got very stiff (86 360 GLEi). I think it is to stop too much temp change on the pre-load. The exhausts for PAS and non-PAS are different so it may also be for the different routing and subsequent heat exposure.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Post Reply