Breaking Volvo 360
Breaking Volvo 360
All parts available
Torque tube - £50
Gearbox/ Diff (welded diff) - £100
Bellhousing - £50
GLT interior - £50
GLT alloys - £50
Redline Seats - £60
Torque tube - £50
Gearbox/ Diff (welded diff) - £100
Bellhousing - £50
GLT interior - £50
GLT alloys - £50
Redline Seats - £60
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
-
- *** V3M DONOR ***
- Posts: 4398
- Joined: 06 Jan 2007 02:38 pm
- Location: Bonn, Germany
Re: Breaking Volvo 360
Any sunroof cables?
Cheers
Tom
Cheers
Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
Re: Breaking Volvo 360
will have a look mate.
Dont think its working though
Dont think its working though
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Re: Breaking Volvo 360
This is going to sound a bit weird, but I'm after the threaded bar/nut that holds the heater box to the bulkhead (it's in the open hole), I dropped mine on removal and can't find it!
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
Re: Breaking Volvo 360
Hi Steve.
I have loads of nuts and bolts that i have removed over the years.
If someone could put up a photo of the one you need i could
at least have a look.
Cheers Mark.

I have loads of nuts and bolts that i have removed over the years.
If someone could put up a photo of the one you need i could
at least have a look.
Cheers Mark.





Re: Breaking Volvo 360
how are the front radius arm mounts rust wise (deep or surface)? I could use the radius/tie bars and bottom lever arms too. Willing to post to NI?
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
Re: Breaking Volvo 360
Ride_on - when you say lever arms, do you mean wishbones? Because that might be what I'm after...
Re: Breaking Volvo 360
SteveP wrote:This is going to sound a bit weird, but I'm after the threaded bar/nut that holds the heater box to the bulkhead (it's in the open hole), I dropped mine on removal and can't find it!
should have one of those mate
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Re: Breaking Volvo 360
yep not a prob pm meRide_on wrote:how are the front radius arm mounts rust wise (deep or surface)? I could use the radius/tie bars and bottom lever arms too. Willing to post to NI?
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Re: Breaking Volvo 360
Have you got front bumper? Might be able to pick it up depending on location
Re: Breaking Volvo 360
Can you take out the front subframe? Not bothered about the wishbones, just need the center bit.
- Attachments
-
- IMG_2018_zpsd2eced3f.jpg (63.83 KiB) Viewed 13739 times
-
- Posts: 65
- Joined: 09 May 2012 10:46 pm
Re: Breaking Volvo 360
Rear axle and drums how much dude
Re: Breaking Volvo 360
undecided as to which one to keep atm mate as Ive got a rear disc conversion and a normal set up
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
Currently breaking a 4dr E Reg 360 GLT (Silver/ Gold) & Volvo 340 1.4 3dr (dark grey)
-
- Posts: 4
- Joined: 04 Jul 2013 07:27 am
Re: Breaking Volvo 360
Hi,
Do you still have the 3 piece plastic spoiler from the bottom of the front valance?
Thanks,
Dan
Do you still have the 3 piece plastic spoiler from the bottom of the front valance?
Thanks,
Dan
-
- Posts: 647
- Joined: 09 Aug 2005 02:24 pm
- Location: Antwerp, Belgium
Re: Breaking Volvo 360
I am looking for the two rubber hose sections that form the filler hose, preferably with your chassisnumber as they've changed over the years.
I believe that top and bottom can differ.
This so that BBB is getting good samples to reproduce.
Can you tell me postage to Belgium or to Suffolk?
THX
I believe that top and bottom can differ.
This so that BBB is getting good samples to reproduce.
Can you tell me postage to Belgium or to Suffolk?
THX
Life is a journey, so sit back and enjoy the ride!
Born Built Beauties: Parts keeping our cars on the road!
http://www.Born-Built-Beauties.eu
Born Built Beauties: Parts keeping our cars on the road!
http://www.Born-Built-Beauties.eu