360 Gearbox frontplate to Torque tube bolt thread
360 Gearbox frontplate to Torque tube bolt thread
Anyone know off hand what thread the 4 bolts that connect the torque tube to the gearbox flange (the flange that is resting on the bubble wrap in this picture) I'm after diameter and pitch please, I need to grab/make some threaded rod the same and if I can do it before I get to the TT that would be super useful!
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Re: 360 Gearbox frontplate to Torque tube bolt thread
M12 x 1.75, they are socket head caps but didn't get the length as wasn't relevant for me!
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Re: 360 Gearbox frontplate to Torque tube bolt thread
You need the length dude? I can take one out at the weekend and check.
Re: 360 Gearbox frontplate to Torque tube bolt thread
No, I'm fine thanks dude, I have a couple out and in the house now! Ta for the offer though, appreciate it
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
-
TheUglyDuckling
- Posts: 44
- Joined: 16 Jan 2013 02:43 pm
Re: 360 Gearbox frontplate to Torque tube bolt thread
Can I add a question?
Has anyone replaced the flange that`s visible in the picture, the one connecting the gearbox to the torque tube? Does replacing it with a stronger one help sorting out the fragility of the drivetrain?
Has anyone replaced the flange that`s visible in the picture, the one connecting the gearbox to the torque tube? Does replacing it with a stronger one help sorting out the fragility of the drivetrain?
-
classicswede
- *** V3M DONOR ***
- Posts: 5471
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: 360 Gearbox frontplate to Torque tube bolt thread
I've never know that part to fail. The common failure is the clamp that holds the Torque bar to the gearbox. The splines tend to give way there
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
-
TheUglyDuckling
- Posts: 44
- Joined: 16 Jan 2013 02:43 pm
Re: 360 Gearbox frontplate to Torque tube bolt thread
Would that be no. 25?
- TorquetubeGearbox.jpg (15.2 KiB) Viewed 19698 times
-
classicswede
- *** V3M DONOR ***
- Posts: 5471
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Re: 360 Gearbox frontplate to Torque tube bolt thread
That's it.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/
-
TheUglyDuckling
- Posts: 44
- Joined: 16 Jan 2013 02:43 pm
Re: 360 Gearbox frontplate to Torque tube bolt thread
Thx!
Later this year I'll take it out and get a stronger replacement made. Is anyone else interested? Got to warn you tough - might take quite some time.
Later this year I'll take it out and get a stronger replacement made. Is anyone else interested? Got to warn you tough - might take quite some time.
-
foggyjames
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
Re: 360 Gearbox frontplate to Torque tube bolt thread
Pffffffft! Isn't that sort of thing best transmitted in a PM?!Speedy88 wrote:You need the length dude?
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
Re: 360 Gearbox frontplate to Torque tube bolt thread
Yes please, but how do you intend to do it without upsetting the balance?TheUglyDuckling wrote:Thx!
Later this year I'll take it out and get a stronger replacement made. Is anyone else interested? Got to warn you tough - might take quite some time.
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7