Mr.Borrie's 360 Cup V2

For drift/rally/builds cars projects, engine conversions etc...
Describe your plans, project(s) evolution, works progress and final result!
User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 26 Mar 2015 02:18 pm

The season of 2014 was not successful. The new build car had some major issues when it first went on the track. The last few months where used to make some improvements on the car that would hopefully resolve the issues of the car stop running after about 2 fast laps on the track.

After a long winter working March 14 was the first tryout of 2015. We went early and brought allot of spare parts. We were guessing to do a series of laps and then go in the pits to resolve more issues that we might encounter.

However the car turned out to be working great, so we spend the whole day racing and having just a great time without fellow racers. It would have been perfect if not the last ten minutes late in the afternoon the fuel pump decided to die on us. Still we are very much pleased with the result of our little 360 now working as we want it. Looking so much forward for the start of a new season.

Image
Image
Image
Image
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 08 Apr 2015 11:46 am

unfortunately it turns out its not only the fuelpump that died..

Image
Image


Annoyed about it i went own with my original plan of replacing the fuelpump and changing the oil in the diff.. I'll be looking for a new block now.... :grrr:

Image
Image

These parts will have to wait for a new block
Image
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 14 Apr 2015 08:33 am

Donor found, block pulled. Let the rebuild begin!

Image
Image
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 01 May 2015 10:42 am

Sold the parts car off and installed the engine, she runs again :cheers:
Topped off the axle with some fresh oil while i was at it, put in around a liter, it needs 1,4 so need to get some more but for now it will play


Image
Image
Image
Image
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 23 Aug 2015 09:45 pm

Forgot to update this in while, Had another race and did allot of things on the car.
Engine ran great even was in for the 4th place at one point but i span out.. i was pretty rusty but i had so much fun!
to bad the last race the clutch gave out so time to pull that engine again :)

Also got some damage, in the front of the field people dont play as nice as in the middle

Image
Image
Image
Image
Image
Image
Image

Also working on some new stuff for in the front
Image
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 23 Sep 2015 02:33 pm

Gaz damper are in, lifted the engine again to check the clutch

I confirmed after long debate that it must have been the clutchplate

Image

Put in a NOS OEM plate and replace the Pressureplate for a used one i had around (the clutch kit is NLA both at Volvo and aftermarket?) with the engine out i put on some fresh paint

Image

Than i repaired the damage from last race

Image
Image

Still having some issues with the gearbox or adjustment of the clutch..
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
trabitom99
*** V3M DONOR ***
Posts: 4398
Joined: 06 Jan 2007 02:38 pm
Location: Bonn, Germany

Re: Mr.Borrie's 360 Cup V2

Post by trabitom99 » 23 Sep 2015 03:54 pm

mrborrie wrote:Put in a NOS OEM plate and replace the Pressureplate for a used one i had around (the clutch kit is NLA both at Volvo and aftermarket?)
Oh dear, that's not good news ... You should be able to source an aftermarket one though.

Shouldn't this one fit? There are quite a few online shops which stock it.
http://www.daparto.de/Teilenummernsuche ... 3082204031

Cheers

Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 23 Sep 2015 03:59 pm

Actually i am now looking into the Pressureplate of a B204FT.. apparently thats the stronger brother for it? No idea on partnr's and if it will actually work though. That still leaves me with finding a propper Release bearing. at this point i would like to replace everything if it turns out this is not box related and i have to pull the engine for the 3th time this year
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
trabitom99
*** V3M DONOR ***
Posts: 4398
Joined: 06 Jan 2007 02:38 pm
Location: Bonn, Germany

Re: Mr.Borrie's 360 Cup V2

Post by trabitom99 » 23 Sep 2015 04:27 pm

Is that the one?
http://www.daparto.de/Teilenummernsuche ... 3082999763

Quite a price difference, but it'd be good to know whether it works out for you in race mode :-)

Cheers

Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 24 Sep 2015 06:18 pm

trabitom99 wrote:Is that the one?
http://www.daparto.de/Teilenummernsuche ... 3082999763

Quite a price difference, but it'd be good to know whether it works out for you in race mode :-)

Cheers

Tom
I was not aware of that model... it looks like it would fit. The model from the B204FT is IIRC Sasch 3082 204 033

http://www.auto-onderdelenexpert.nl/sachs-783892
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

360beast
Posts: 873
Joined: 27 Dec 2013 08:40 pm

Re: Mr.Borrie's 360 Cup V2

Post by 360beast » 24 Sep 2015 08:52 pm

Great work as usual, liking the colour choice for the engine block

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 15 Oct 2015 10:22 am

Did not make any photos but spend another full day replacing the clutch. The spring of the clutch arm was bent.. Car is now running and shifting fantastic. ready for Saturday.. last race of this year
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 18 Oct 2016 10:30 am

had a race last weekend.

3th place race !!!!! :cool:
Ended up 5th overal in the day, Pretty happy with the result

https://www.youtube.com/watch?v=P_zHvcSJXrU
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

Ride_on
Posts: 2262
Joined: 26 May 2009 05:34 pm
Location: Belfast, N. Ireland

Re: Mr.Borrie's 360 Cup V2

Post by Ride_on » 18 Oct 2016 11:36 pm

The 033 fits after a little trimming, you can also use astra gte F20 box clutch disk as a full 228mm disk but hard to get on its own.

viewtopic.php?f=6&t=8663
1980 345 DL_______1987 360 GLE (project car restored to GLT spec and B230FT'd)
1984 360 GLT______1987 360 GLT
1983 360 GLS______1989 360 GLE
1985 340 GL_______1986 340 1.4
1985 360 GLS______1995 940 SE 2.3 Turbo Estate (daily)
1987 340 GL 1.7

User avatar
mrborrie
Posts: 240
Joined: 06 Jul 2010 08:17 am
Location: Netherlands

Re: Mr.Borrie's 360 Cup V2

Post by mrborrie » 30 Jun 2017 10:01 pm

Car is for sale!
764 Turbo 86'|Volvo 144 72|Volvo 360 86'||Volvo 360 GLS 85'|242 77"|
Website: http://www.brick-autosport.com
Facebook: http://www.facebook.com/pages/Brick-Aut ... 98?sk=wall"

Post Reply