Good day all, while taking my engine out the other day i came across a wire, this wire has now been identified as the main feed for the rear window wiper wash. However this wire does not come through the fuse box it is just "poked" through the bung for the speedo.
My OCD is not liking this and i was wondering if anyone knows of a wire that is not being used in the fusebox so i can route this wire nicely along the wiring loom.
Also any idea where i can get this bung that has fallen apart for the speedo?
Hello Sir, rest assured OCD is treatable - when it takes 2 hours to get out of your house, get help - the treatment is very effective. Thanks for the parts which arrived today ;-0
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA. 1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue). 1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess). 1989 340 1.7 GL, 108k, 3 door (Red Ness). More info here!
Its a kit car accessory firm in Kent and quite a good supplier.
Also, 'the bay' where a search for 'bulk head grommet' gives promising results.
The alternative 'in situ' method is to use foam draft excluder tape and wrap it round the cable in a spiral till it fills the hole in the bulk head and then give it a generous coat of black silicone sealant.
1988 340 1.4 GL, 218k, 5 door (Grey Bess). Gone to CBA. 1991 340 1.7 GL, 64k, 5 door, petrol blue (Deep Blue). 1988 360 2.0 GLE, 140k, 5 door, ocean blue metallic (Blue Bess). 1989 340 1.7 GL, 108k, 3 door (Red Ness). More info here!
Its a kit car accessory firm in Kent and quite a good supplier.
Also, 'the bay' where a search for 'bulk head grommet' gives promising results.
The alternative 'in situ' method is to use foam draft excluder tape and wrap it round the cable in a spiral till it fills the hole in the bulk head and then give it a generous coat of black silicone sealant.
