breather hosing

Post by **5lab** » 23 Jul 2004 12:22 pm

anyone know where i can get some? the thin diameter stuff that does the econometer etc. just need a meter or so of it, to cut up and use as i see fit.

Hugh

Post by **Janitor** » 23 Jul 2004 04:19 pm

i just stole some from breakers when i fitted oil catchment tank(breather pipe),but i fancy some nice braided ones when i find some at the right price.

Post by **5lab** » 23 Jul 2004 07:56 pm

halfords sell braided stuff as fuel injector hosing

Post by **foggyjames** » 29 Jul 2004 02:02 pm

Volvo use the same stuff for washer pipes....[craig david]get your butt to the scraaaap-yaaard[/craig david]

cheers

James

Post by **5lab** » 29 Jul 2004 02:07 pm

oh i've loads of that from when i ripped the headlight wiper plumbing out. nice one

Post by **Duvel78** » 29 Jul 2004 07:14 pm

The diameter is bigger for the econometer than for the windscreen washer

Post by **foggyjames** » 29 Jul 2004 09:52 pm

Are you sure? If so, only by a tiny amount....on my car at least...

cheers

James

Post by **Duvel78** » 29 Jul 2004 11:10 pm

Yeah I'm sure about the difference, the pipes are definetely different; look at that picture I made now (sorry for the bad quality > webcam)

Post by **5lab** » 29 Jul 2004 11:29 pm

you have too much stuff lying around dude..

Post by **Duvel78** » 29 Jul 2004 11:49 pm

True

(I've made a better picture)

Post by **foggyjames** » 29 Jul 2004 11:55 pm

If anyone from the outside world reads this...they'll think we're all VERY sad!

I think mine might have washer pipe for vac pipes in places....it ought to work either way, no?

Speaking of washers.....do you want this headlight wiper kit or what Aymat?!

cheers

James

Post by **Duvel78** » 30 Jul 2004 12:08 am

foggyjames wrote:If anyone from the outside world reads this...they'll think we're all VERY sad!

No no, it's a sign of professionalism!!

It's important to take details into account

Of course I want my kit!

I was so worried about my 340, the carb problems the last weeks... I forgot a little bit the wipers! I will send an email to you about that, ok?

Post by **ravennexus** » 30 Jul 2004 12:10 am

i mean really.

open up that demon tweeks motorsports catalouge you all should have (no i don't mean the one with all the alloys and naff springs in, thats the tuning one.)

turning the page with samco silicone hose on. and order yourself some stuff in the size you want. i'd go for 3mm as you could use it for ether aplication, it holds boost pretty well too (13-16psi when i had a turbo) but i guess thats not a concern for most of you.

anyway have fun.