300 series steering wheel ? 400 series fit?

Post by **djbolf** » 10 Feb 2006 08:28 pm

as topic title , does a 480 es wheel fit a 360GLT?

Post by **SteveP** » 10 Feb 2006 09:02 pm

Yes, but with some modifications (I've seen a pic of a 480 wheel on a 300 before). But why?! The 480 ES wheel is horrid, the standard 360GLT is better. The only nice wheels on the 400 series are the Momo optional wheels.[/i]

Post by **djbolf** » 10 Feb 2006 09:03 pm

Reason is:

http://cgi.ebay.co.uk/MOMO-Boss-Type-90 ... dZViewItem

Post by **djbolf** » 10 Feb 2006 09:04 pm

anyone know what mods are needed?

Post by **classicswede** » 10 Feb 2006 09:46 pm

I'm also looking for a way to fit a momo wheel onto a 300.

Post by **Fuse** » 10 Feb 2006 09:56 pm

Momo wheels will fit with Luisi boss. I have Luisi boss in my R-Sport (made by Momo) wheel. Luisi bosses are available for 340/360. I bought mine for ~40 euros from this local parts shop.

http://www.volantiluisi.it/articolo_Moz ... I_Marca=51

According to this it seems that the 480 wheel will fit. I'm not 100% sure though because I haven't tried it.

http://www.300power.com/garaget/480ratt.htm

Post by **classicswede** » 10 Feb 2006 10:43 pm

Well that is a usfull bit of info. I just need to find somewhere in the uk I can buy one from.

Post by **Stuntman** » 11 Feb 2006 12:07 am

Ok but will it fit the 200 series?

Post by **djbolf** » 11 Feb 2006 12:38 am

FUSE , do you fancy doing me and Dai a favour and shipping two boss' over?

We'd pay you the cash for postage and a little beer money too!!!

Post by **340GLT** » 11 Feb 2006 12:51 am

Stuntman i have a boss kit i bought as i was told it fitted a 300 however it doesnt!!! It may be a 240 one??? If you can find a pic of the momo boss i can check!!!

As for modding the 480 boss to suit a 300 you have to mill two hole to fit the horn ring the splines are the same so thr boss does bolt straight on!!
The boss i modded was the genuine momo one from a 480!!! Never had any troubles with it!!
Cheers Adam

Post by **classicswede** » 11 Feb 2006 01:33 pm

Group buy anyone?

Post by **djbolf** » 11 Feb 2006 02:35 pm

oops , won the bid on the 400 boss , so it looks like i will be doing a guide to modding this one to fit

can anyone provide a rough transalation to the guide above?

Post by **djbolf** » 13 Feb 2006 12:42 pm

djbolf wrote: can anyone provide a rough transalation to the guide above?

Anyone?

Post by **Ali** » 13 Feb 2006 01:21 pm

Not a clue how adam did it but you could just fit the boss and use a seperate push button horn on the dash like i've done, passes the MOT fine,
cheers
Ali

Post by **JOHN360** » 13 Feb 2006 01:57 pm

I've fitted one on HUG - from memory, I sawed off the indicator cancel part & you then attached the plastic ring from any 300 s/wheel on to it. It's a tight fit on to the hub, so shouldn't need glueing etc.

Does 'feel' better as a thicker rim, but the wheel does stick out further on the spline than the standard wheel. Not a problem for me, as my seat is further back than standard due to another mod for my long legs !

TTFN,

John