toping up the gear box oil.????

Post by **garethreece** » 25 May 2006 12:03 pm

Im pretty sure the manual tells you about the oil changes etc because i was surprised just how much stuff they tell you how to do in it.

Post by **Japper** » 25 May 2006 12:57 pm

good luck opening those freaking bolts. I have changed the gearbox on my 360 last year, took almost a day to loossen those bolts for oil changes.

Post by **SoLaMaNdA** » 26 May 2006 08:44 pm

I wouldn't recommend removing the gearbox. Use a decent socket, very long lever and the bolts should move, check the top up bolt can be removed before draining! As said before, fill till it overflows out of the top up hole.

Sorry if this has been repeated, not read all the thread.

Post by **ozy volvo** » 30 May 2006 10:04 am

Thanks people. I know i should buy a manual but i want to see if the car will last a few more months before i go and get one.

Vince

Post by **foggyjames** » 31 May 2006 12:31 am

C'mon man, you could have one shipped to your door for the cost of a couple of pints!

Good luck with it.

cheers

James