clutch plates

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
User avatar
bennett
Posts: 435
Joined: 01 Jan 2006 01:11 pm
Location: telford shropshire
Contact:

clutch plates

Post by bennett »

can anyone tell me if the volvo 480 turbo clutch plate will fit a 340? or if the is any other up rated clutch plates that may fit?
thanks
Image
User avatar
340cbr
Posts: 501
Joined: 31 Oct 2005 12:50 pm
Location: Portugal

Post by 340cbr »

You can use everything from the 400 turbo except the plate.

In this momment I'm putting in mine 1.7 the clutch kit from a 400 Turbo but with a 300 plate.
| 92' 965 Turbo 16v | B204FT - 190hp |

Had: 90' 340 GL + Turbo | B18 FT | Koni's | Alpina White |
User avatar
Fuse
Posts: 1364
Joined: 29 Jul 2004 09:03 pm
Location: Finland
Contact:

Post by Fuse »

There are sintered stock size clutch disc available from Sachs for 300-series. Stiff plates or with springs, both are available.

For Volvo engine models, also 228mm clutches from VW Golf will fit and it works good Sachs turbo pressure plate. Sintered and standard plates available.
Volvo R-Sport - Equipment for the car enthusiast.

“Buy land, they're not making it anymore” - Mark Twain


"There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games." -Ernest Hemingway
Post Reply