360 Spares for sale in Melbourne, Australia.

Put here your advertisements to sell cars and parts
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

360 Spares for sale in Melbourne, Australia.

Post by dalahare »

I have some spares i'm looking to get rid of if any of you aussies are intrested. Pickup is either in The Basin, SE melbourne, or i can post most of it.

A set of AC delco front shocks, never fitted, still in boxes. $40.

A waterpump, SOLD

Rear drums in good nick, $10 or free if you buy any of the other stuff.

A set of genuine volvo plastic fitted floormats, $10.

A set of four fuel injectors, SOLD

Rear parcel shelf -GONE-

Whiteline front swaybar and link kit, the drivers side link has a bit of a kink in it, but it could still be used as is, straightened or replaced, it is really just a 125mm bit of all thread you could pick up from bunnings or a bolt shop for a few $ that whiteline charge you an arm and half a leg for. the bar was on the car for approx 4000ks. $150

Two mk2 360glt mags, one is the rim only, one has a 185/65 goodyear eagle ga tyre on it with usable tread, these are the two good rims of the 5 that came with the car, all the others had flatspots so were tossed away. $20

And finally a haynes manual, hard cover, all there including my own greasy fingerprints. $15.
Last edited by dalahare on 18 Aug 2008 04:23 pm, edited 3 times in total.
User avatar
hatch360
Posts: 287
Joined: 17 Jun 2006 02:51 am
Location: Melbourne, Australia

Post by hatch360 »

guess most people bought them AC Delco shocks :lol:

I am kind of interested in the floormats but with postage I dont think its worth it
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

Where abouts are you?
User avatar
hatch360
Posts: 287
Joined: 17 Jun 2006 02:51 am
Location: Melbourne, Australia

Post by hatch360 »

NW Suburb Taylors Lakes
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

I should be heading out to Altona this weekend sometime, If you want the floormats i could bring them out to you.
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

Just bumping this up, still go tthese bits, still haven't found a 360 for sale here in melbourne to fit these to, i'm thinking of sticking them on ebay if noone is intrested.
Figgy
Posts: 279
Joined: 21 Jun 2008 10:42 am
Location: North Queensland, Australia

Post by Figgy »

I'm interested....Would the waterpump and injectors fit the car below?
1985 B200E 360GLT Hatch
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

Certanly should, as that is the exact same car as what i had. :wink:
Figgy
Posts: 279
Joined: 21 Jun 2008 10:42 am
Location: North Queensland, Australia

Post by Figgy »

Woohoo! Will pm you for details.

Cheers! Anne.
1985 B200E 360GLT Hatch
User avatar
hatch360
Posts: 287
Joined: 17 Jun 2006 02:51 am
Location: Melbourne, Australia

Post by hatch360 »

I really stuffed up with this opportunity as i could of done with some parts off the car that are really hard to find :(
Figgy
Posts: 279
Joined: 21 Jun 2008 10:42 am
Location: North Queensland, Australia

Post by Figgy »

hatch360 wrote:I really stuffed up with this opportunity as i could of done with some parts off the car that are really hard to find :(

I'm chasing some other bits and pieces as well and asked Dalahare if anything else was available, they told me that the car was written and and had been taken away, so no more bits available.
1985 B200E 360GLT Hatch
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

I was going to buy it back but in the end just needed the money straight up to get another vehicle... haven't seen it ocme up at the auctions, probably went straight to scrap metal. :cry:
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

Ok Figgy, went to the PO today, but without your postcode :x , anyway, I knew you were around townsville, and postage to there for the pump and injectors is $15 odd, I'll do them both for $85 posted even if it ends up being a little more for the postage as you're a bit further north. :wink:

And someone PM'd me on postage for the swaybar to uk, it is a dismal $190 for airmail, and $80 for the slow boat. :evil:
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

hatch360 wrote:I really stuffed up with this opportunity as i could of done with some parts off the car that are really hard to find :(
Don't be sad, you can still buy the swaybar, floormats and manual off me, i'll even chuck in the rear drums and deliver them all for free. :lol: or fit the bar for you if you come pick it up. :wink:
Figgy
Posts: 279
Joined: 21 Jun 2008 10:42 am
Location: North Queensland, Australia

Post by Figgy »

You're just about spot on with my location, I'm about 1 1/2 hours north of Townsville. All sounds like a fair deal to me. I've just sent you a PM.

Cheers!
1985 B200E 360GLT Hatch
Post Reply