360 breaking

Post by **filthyjohn** » 02 Oct 2008 07:00 pm

Need a handbrake lever if it's the same as a 340 (it is off the top of my head). Anyone ever adapted C/L and E/W stuff to fit a 3dr?

Post by **Ronnie** » 02 Oct 2008 07:15 pm

e/w are different for 3 dr, but I'm short on details - Adam knows about this. I'm sure the c/l could be made to fit nae bother

Post by **filthyjohn** » 02 Oct 2008 07:45 pm

Mount the motors at the bottom of the door and connect them to the manual handles with bike chain?

Post by **Ronnie** » 02 Oct 2008 08:29 pm

If that's the Maccum way, then you go right ahead with your filthy plans

Post by **foggyjames** » 03 Oct 2008 12:43 am

Handbrake lever should be no problem. It does have E/W, but the mechs are wrong (and probably toast anyway...it's been stood...)

Not sure if it has C/L (no battery). I can check...

cheers

James

Post by **filthyjohn** » 03 Oct 2008 08:25 am

Cheers James.

And it's spelt MACKEM, thanks Ronald.

Post by **redline** » 03 Oct 2008 08:50 am

filthyjohn wrote:And it's spelt MACKEM, thanks Ronald.

oops , me thinks ownage to the John of filth

Post by MJ » 03 Oct 2008 11:06 pm

Don't forget to check your e-mails for parts requests either

Post by **foggyjames** » 04 Oct 2008 03:18 am

I got one ages ago from you Mr MJ....but not a recent reminder

Never fear, the parts in question are sat on my desk

Email me your address...

cheers

James

Post by MJ » 04 Oct 2008 11:57 am

Hey James. I didn't e-mail you again about the bit as I didn't know you'd started breaking it. Anyway, thanks - e-mail on the way...

Post by **foggyjames** » 04 Oct 2008 01:14 pm

Received...I'll reply a bit later

cheers

James

Post by **Bazboy** » 04 Oct 2008 08:35 pm

Hey James, are the door pins any good? cause its silly had bad mine are now lol. Also will the 360 ones be a direct swap for the 340 ones?

Cheers Dan

Post by **foggyjames** » 04 Oct 2008 09:48 pm

Door pins...i.e. the hinge pins? Last time I checked, they were still available new, at ~99p each...

I doubt used ones are any good at all.

cheers

James

Post by **Bazboy** » 05 Oct 2008 12:54 am

New eh?, Would this be from volvo or autofactors?

Cheers Dan

Post by **filthyjohn** » 05 Oct 2008 02:13 am

80p each from the main dealer, I bought some 2 days ago so they're still available. Next day service too.