Bits for sale

Put here your advertisements to sell cars and parts
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C »

I ain't driving up again for a while...
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
User avatar
Carl
*** V3M DONOR ***
Posts: 1275
Joined: 17 Jan 2004 12:29 pm
Location: Southampton, UK
Contact:

Post by Carl »

Hehehe, I think the bushes may be postable ;)

Your call Jason...
Carl
Rover SD1 Vitesse (and no Volvos :()
But previously:
1988 Volvo 360GLT
1988 Volvo 360GLT
1984 Volvo 340DL
www.carlgibbs.com/gallery
User avatar
foggyjames
*** V3M DONOR ***
Posts: 9361
Joined: 29 Jan 2004 04:20 am
Location: Nottingham, UK

Post by foggyjames »

I think a carb, renix unit, dizzy cap, rotor arm & lead set might be trickier than a few poly bushes...;)

cheers

James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
User avatar
Jason B
*** V3M DONOR ***
Posts: 909
Joined: 17 Jun 2007 09:18 pm
Location: Bridport, Dorset and Southampton

Post by Jason B »

I think I'll take the poly bushes and stiffened springs if thats ok, where abouts are you for picking stuff up from?
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C »

The pub on Thursday, arn't you Carl :P
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
User avatar
Carl
*** V3M DONOR ***
Posts: 1275
Joined: 17 Jan 2004 12:29 pm
Location: Southampton, UK
Contact:

Post by Carl »

Chris_C wrote:The pub on Thursday, arn't you Carl :P
I could be Chris, I could be :)

If not I'm in West End
Carl
Rover SD1 Vitesse (and no Volvos :()
But previously:
1988 Volvo 360GLT
1988 Volvo 360GLT
1984 Volvo 340DL
www.carlgibbs.com/gallery
User avatar
Jason B
*** V3M DONOR ***
Posts: 909
Joined: 17 Jun 2007 09:18 pm
Location: Bridport, Dorset and Southampton

Post by Jason B »

Sadly I'm unable to make it to the pub tonight, I'm in dorset at the moment but i'll be back in soton next week.
User avatar
Carl
*** V3M DONOR ***
Posts: 1275
Joined: 17 Jan 2004 12:29 pm
Location: Southampton, UK
Contact:

Post by Carl »

Another updated list of bits....
D cam (new) £5
Oil pump, intermediate shaft and dizzy from a 360 £5
360 clutch kit (new, but no bearing) £10 (2 available)
240 4 pot calipers £25
480 vented calipers with 2 new sets of pads £15
Rear dampers (new) - no bushes £10
B19 water pump, I think (new) £5
B2x0 bottom end gasket set £5
Oil pressure gauge (boxed) £20
Oil pressure sender for 240 diesel (I think) £5
Oil temp sender for 2/7/900 (I think) £5
Volvo strut top mounts £40 (cost £49.20 +vat from stealership)
Carl
Rover SD1 Vitesse (and no Volvos :()
But previously:
1988 Volvo 360GLT
1988 Volvo 360GLT
1984 Volvo 340DL
www.carlgibbs.com/gallery
User avatar
Carl
*** V3M DONOR ***
Posts: 1275
Joined: 17 Jan 2004 12:29 pm
Location: Southampton, UK
Contact:

Post by Carl »

Evening all,

I'm having a clean up of the garage at the moment, so need to get these bits shifted. So I've started putting some of it on ebay...
http://search.ebay.co.uk/_W0QQsassZcsg100

Other stuff I still need to get rid of:
Oil pump, intermediate shaft and dizzy from a 360 £5
360 clutch kit (new, but no bearing) £10 (2 available)
240 4 pot calipers £25
Vauxhall Carlton vented discs (possibly to use with caliper above)
480 Turbo vented calipers and pads £15
440 throttle butterfly with TPS £5
360 brake drums, brand new £15 pair
Rear dampers (new) - 1 bush and 2 nuts missing £10
B19 water pump, I think (new) £5
B2x0 bottom end gasket set £5
Oil pressure sender for 240 diesel (I think) £5
Volvo strut top mounts £35 (cost £49.20 +vat from stealership)
Volvo VC308 cassette player with code but no wiring £5
360 earth strap, good condition £2

Cheers
Carl
Rover SD1 Vitesse (and no Volvos :()
But previously:
1988 Volvo 360GLT
1988 Volvo 360GLT
1984 Volvo 340DL
www.carlgibbs.com/gallery
User avatar
Jason B
*** V3M DONOR ***
Posts: 909
Joined: 17 Jun 2007 09:18 pm
Location: Bridport, Dorset and Southampton

Post by Jason B »

Hi carl

I think I mentioned the calipers and discs before, are you able to hold on to them until I return to soton on the 23rd to see how they offer up?

Cheers

Jason
User avatar
Carl
*** V3M DONOR ***
Posts: 1275
Joined: 17 Jan 2004 12:29 pm
Location: Southampton, UK
Contact:

Post by Carl »

Yes mate, they're reserved for you (was just coming back to put that on the original list after putting it up on the VOC forum). But whilst I've still got them I was keeping them on the list in case you didn't want them for any reason and someone else wanted 2nd dibs :)

Also I've still the the B230 lump in the garage - this is reserved too, but if anyone wants to put their name on the list in case it falls through let me know.
Carl
Rover SD1 Vitesse (and no Volvos :()
But previously:
1988 Volvo 360GLT
1988 Volvo 360GLT
1984 Volvo 340DL
www.carlgibbs.com/gallery
User avatar
Jason B
*** V3M DONOR ***
Posts: 909
Joined: 17 Jun 2007 09:18 pm
Location: Bridport, Dorset and Southampton

Post by Jason B »

How much for? if the price is right, me! me! me! me! me! me! me! :D lol
User avatar
Carl
*** V3M DONOR ***
Posts: 1275
Joined: 17 Jan 2004 12:29 pm
Location: Southampton, UK
Contact:

Post by Carl »

I think I said £75 originally, but filthyjohn has first dibs if he can make it down here to get it.
Carl
Rover SD1 Vitesse (and no Volvos :()
But previously:
1988 Volvo 360GLT
1988 Volvo 360GLT
1984 Volvo 340DL
www.carlgibbs.com/gallery
pettaw
*** V3M DONOR ***
Posts: 1673
Joined: 15 Aug 2004 07:39 pm
Location: London, UK

Post by pettaw »

rear brake drums would be useful if/when they go 'no longer available' Can you put them aside for me mate? I could either collect next time I'm in the area or meybe get Chris to collect them if time's short.
User avatar
340cbr
Posts: 501
Joined: 31 Oct 2005 12:50 pm
Location: Portugal

Post by 340cbr »

Carl, do you have any fuel pump from a 360 GLT?
| 92' 965 Turbo 16v | B204FT - 190hp |

Had: 90' 340 GL + Turbo | B18 FT | Koni's | Alpina White |
Post Reply