Page 2 of 5

Re: Collection of big mechanical bits for 300s

Posted: 11 Aug 2011 12:35 pm
by filthyjohn
Nosher wrote:Hey, would you have a standard 340 1.4 exhaust (full system from the downpipe back)?
Cheers
Alfie
Sorry mate I haven't had a 1.4 for ages, until recently, so I got rid of all the exhaust I had lying around.

jon-ovlov wrote:Possible needage of another prop, depending on the turn around of the custom unit.

Also out of interest, how much is the 343 going to be? . . . .
I've only got 1 spare prop, if I drive my 340 to RetroRides I'll be taking it with me in the boot just in case. If I make it back safely it'll be available.
What's the going rate for a prop these days?
As for the 343 I'd be looking for around £400 with all new brakes and a canny bit of work done to it. £500 if you want it with the Ally Cats. I'll start a thread on that in the next few days.

Re: Collection of big mechanical bits for 300s

Posted: 11 Aug 2011 01:23 pm
by theo2468
ill be interested in the alleycats on there own
if your willing

Re: Collection of big mechanical bits for 300s

Posted: 11 Aug 2011 06:24 pm
by jon-ovlov
Cool, prop was a precaution just in case the custom one doesn't arrive in time. I'm told it will be done for Tuesday, so s'all good! £500 eh? If only I could find somewhere to store it! :lol:

Re: Collection of big mechanical bits for 300s

Posted: 12 Aug 2011 12:03 am
by filthyjohn
jon-ovlov wrote:Cool, prop was a precaution just in case the custom one doesn't arrive in time. I'm told it will be done for Tuesday, so s'all good! £500 eh? If only I could find somewhere to store it! :lol:

It lives on the road at the moment, nicely waterproof and running lovely :wink:

theo2468 wrote:ill be interested in the alleycats on there own
if your willing

Maybe Theo, they really suit the car though, but if whoever buys the car isn't too fussed by them you can have first dibs mate.

Re: Collection of big mechanical bits for 300s

Posted: 13 Aug 2011 03:56 pm
by theo2468
show me a picture of the 343 on the alley cats and ill be extremely tempted to buy it if i can flog my mk3 on.
i do like silver mk2's

Re: Collection of big mechanical bits for 300s

Posted: 13 Aug 2011 04:42 pm
by SteveP
The 343 sounds like a bargain to me

Re: Collection of big mechanical bits for 300s

Posted: 14 Aug 2011 10:17 pm
by Nimminz
Have any volvo floor trays to fit a mk3? black preferable :)
Mk2 360 rear silencer, as i understand they dont have the stupid loop thing going on like the mk3 one but join the centre pipe in the same place / way
mk 3 black plastic inserts for colour coded bumpers? might be after a spare set so i can spray em gloss black

Re: Collection of big mechanical bits for 300s

Posted: 14 Aug 2011 10:21 pm
by SteveP
If John doesnt I have a MK2 360 rear silencer, not Volvo but new

Re: Collection of big mechanical bits for 300s

Posted: 14 Aug 2011 10:24 pm
by Nimminz
not being volvo don't bother me, just after something that isn't stupidly designed like the mk3 but is standard on the noise front. If he doesn't i'll get back to you

Re: Collection of big mechanical bits for 300s

Posted: 14 Aug 2011 10:54 pm
by andy_h
have you got a stereo housing and surround?

Re: Collection of big mechanical bits for 300s

Posted: 14 Aug 2011 11:17 pm
by sammysideways
Can i call 2nd dibs on the alleycats :D

Anyways, Have you got:

Early front anti roll bar
Drivers side wing from 5 door
Bolt on panel links b pillars in the roof

I know its unlikely but thought id ask

Re: Collection of big mechanical bits for 300s

Posted: 15 Aug 2011 02:39 am
by foggyjames
If John doesn't have floor trays or the early ARB, I do. Obviously I'm only going to stick my oar in if John *doesn't* have them...

343 sounds like a bargain.

Are the boxes from injection or carb cars, John? Ought to collect a couple of diffs and at least one spare box come turbo-time. The TT in the 343 is noisy, too, so should probably think about a spare. I have one spare, but that's clearly not enough...!

cheers

James

Re: Collection of big mechanical bits for 300s

Posted: 15 Aug 2011 06:01 pm
by sammysideways
also need the bodypanel that sits under the grill, the long thin one if youve got one?

Re: Collection of big mechanical bits for 300s

Posted: 15 Aug 2011 11:24 pm
by bogbasic
Hello, do you have a silver-grey bonnet pref. vgc?? Bests, bogbasic.

Re: Collection of big mechanical bits for 300s

Posted: 17 Aug 2011 06:19 pm
by theo2468
filthyjon let me know about the 343 when your readdy to sell, intrested cheers