Page 2 of 2
Posted: 18 Oct 2008 07:49 pm
by Bilbo
The Volvo engines rock my boat, I'd love to have a B234F or similar on carbs in mine

. R-Sport developed a 2.3 litre DOHC 16v motor, based on the production B19 four cylinder block, 228 hp at 7,200 rpm on twin 48's.
All my 360's have had great engines revving for fun and much stronger than a pinto........
Posted: 21 Oct 2008 10:25 am
by classicswede
Why not use the 260/760 V6? Twin turbo

That would keep the conversion in volvo style but be very different
Posted: 21 Oct 2008 10:55 am
by Chris_C
One of the blokes in King Soton is supposed to have done a B28/280 300 a while back... never found out who though.
Posted: 21 Oct 2008 12:49 pm
by stuartB
germ wrote:^^ then why not run a v8? adapters are available i believe.
cos you'll probably tear your car in half LOL - Front end, wheels on floor. back end, roof on floor wheels in air. twisted.
sorry to the volvo faithfuls but i dont entirely trust this 360, you know.. they're supposed to be really strong cars but the 300 is clearly the odd one out. mines rusty, weak, and too heavy at the back (4 door) for the suspension..
basically, you gotta strip the lot, strenthen it up a LOT, then rebuild the whole lot with better suspension all round and then put it back together, if you want a good realiable car.
On the plus side, if you bought a 360, the engines are really torquey which is nice. just blow em for better revs and you're laughing.
Shame i aint got that sort of time or money
Posted: 21 Oct 2008 05:44 pm
by germ
^^ i have no rust or flex issues lol
solid as earth its self ,lol a nice little rover 3.5 v8 would do nicly

Posted: 21 Oct 2008 07:40 pm
by Ronnie
germ wrote:^^ i have no rust or flex issues lol
Me neither - I've never felt a 300 flex (just roll like a boat)
Posted: 22 Oct 2008 09:07 am
by classicswede
If you want to prove the point jack up one corner and open and close the door! Two door cars do tend to be more ridged.
Posted: 22 Oct 2008 02:56 pm
by Jason B
either way I wouldn't be putting a dirty RV8 near the car.... get a v8 with balls instead

Posted: 22 Oct 2008 06:42 pm
by germ
^^ u can afford the petrol?? lol
tryed the door opening and shutting, no problems, what i do have problems with is the springs lol they all got soft now??? and the shocks totally dead.
Posted: 22 Oct 2008 09:38 pm
by Jason B
hehe, I'm afraid if you want power then economy will suffer. If you want lots of torquez and the noise to suit, then it'll plummet

- The RV8 is just a very overrated and underpowered engine imho
Posted: 23 Oct 2008 04:04 pm
by stuartB
yeah having slightly slagged off the 300 i have to say, its not really THAT bad, i just had a comedy image in my mind, of the car bent in half under the power of a silly engine..
the 4 door is lighter than my mates 3 door fezza, so its not all bad, eh? I still want a 3 door tho.
its like the car was designed to have 3 doors, and the weight of an extra two doenst do the back end any favours at all, especially as they went with leaf springs (yeah mine have gone soft too). its supposed to look slighty higher at the back than at the front, not scraping the rear valence on the floor like mine is.
to get back on point, redblock all the way! i love the torque, the sound, and the hardcore engine braking (which i guess is part and parcel of the torque?). PLUS it'll cost you a lot less to get hold of than any V8 or 6 pot or whatever. PLUS when bits go wrong, the 240 was pretty common and you can use a large number of their parts to fix your car! happy days
Posted: 23 Oct 2008 04:08 pm
by stuartB
germ wrote:...and the shocks totally dead...
Landrover 90 shocks all the way
http://www.volvo300mania.com/forum-uk/v ... 5752#85752