trabitom99 wrote:

SteveP wrote:Would look good with some GLS trim rings

Nice photos VND, good to see some more pics of your car ...

Tom

Cheers Tom.
Should be getting some good quality snaps done tmoro fingers crossed. So expect a picfest.

Guess I wont be needing those beauty rims after all then!











Old men who dont know what wheels are worth= Win!

now to bung them on, and the suns just come out.........

Wire wheels on a 300... that needs to be seen! Awesome purchase dude, certainly something different

anyone that doesnt like swearing, please look away/cover your childrens eyes now...........................................


FUCK!

they dont fit.

well they do fit.
Theyre 4x100s
they get on the hub fine,
now here come my technical bit....

the pokey through wheel bolt rod-sticks dont poke through far enough for the nuts to get a bite. at all.

help!

What is the offset on the wheels?
And do you have a pic of the back of them?
Adam

And a zoomed in pic of the bolt holes on those wheels.
Adam

340GLT wrote:What is the offset on the wheels?
And do you have a pic of the back of them?
Adam

hang fire man, i'll go and snap one!

looks like theyve got a crazy spacer or summat screwed on?

would that be integral to the wheel?






sorry adam, edit*
the lad i got them off didnt know the offset so I bought them and hoped.
were too cheap to knock back tbh.

comin now

dont seem to be tapered?

sleeve bolts??

Sorry dude can i have a photo of the nut seat on the front face too, i may have solved it, oh if you can measure the diameter of the bolt holes too.
Adam

340GLT wrote:Sorry dude can i have a photo of the nut seat on the front face too, i may have solved it, oh if you can measure the diameter of the bolt holes too.
Adam

*edit. holes are 2cm or 20mm

nut seat on the front face?
explain man.
thought thats what I just did.

Ill measure while you retard it out for me.

Lol those pics werent there when i posted that.
Adam

Yeh you want sleeved nuts mate same design as revolution wheel nuts, thread is 12 x 1.25mm make sure they get washers with them. And the outer diameter of the sleeve fits within the bolt holes, i'm guessing the holes in the wheels are around 20mm if so its definately sleeved nuts.
Adam

340GLT wrote:Lol those pics werent there when i posted that.
Adam

adam, you had me scratching my head there man!

20mm holes.
did seem exessive on the hub.

340GLT wrote:Yeh you want sleeved nuts mate same design as revolution wheel nuts, thread is 12 x 1.25mm make sure they get washers with them. And the outer diameter of them fits within the bolt holes, i'm guessing the holes in the wheels are around 20mm if so its definately sleeved nuts.
Adam

Cheers adam.
Thats the only thing I could think of an all.
Cheers for your help man.

Off to buy sleeved nuts then.