I am alittle tempted to go up to his and have a look over the gate to see what is happening

every body is welcome here in the baske country, and is not far from england, you can take a ferry to bilbao near where i live jajajajaj or the airplane if you prefer, i have a confortable couch and another bed! jajajaja
it,s dificult for me build this car, becouse nobody had anything for this cars and i need to learn skandinavian to look for more info and find pieces, the other things home made ...
i want to start rallying with it !!

Congratulatulations, I´m the galician boy of the 340 B18FT (of drifgalicia)
You have more information of your car here, I am loocking for a 360 to a new proyect whit a friend, but the best is jejeje

hi!!! tell me what you want, maybe i put for sale the other 360, i have some spares and more things.

after 2 weeks being very busy with other things, this weekend i return to the ovlov, fitted the boot floor, weld the jack-stand fitments to the car, panhard suport, rear arms,... clean the welds and spray them to prevent the rust, lots of work and happy with the result, not big result but finising the chasis work, i want to start fitting everything!! jejeje
the friday i took the front coilover proto "finished"

Now THAT is a good idea, why didn't I ever think of it before?

Both the stand mount and coilover look really nice!

thanks, thats the objective, look nice and work better! jejej

after a month doing other things, i return to the car, and started with the bottom of the engine.

Hi all.
I agree with speedy. Raceing-street is way ahead .
Whats needed is for one of you young dudes to do a convertable
Cheers Mark.

MCHUDD wrote:Hi all.
I agree with speedy. Raceing-street is way ahead .
Whats needed is for one of you young dudes to do a convertable
Cheers Mark.

Just not like the one from this thread

http://www.volvo300mania.com/forum-uk/v ... =10&t=4156

there are photos of it somewhere on here I'm sure

dai i see your web, and the entry pic is my car, when it was a street machine.

Meintag's old car? That always looked lovely, didn't make the connection. How is progress?

slowly. yes is ex-meintags car i bought it to finish his proyect we had the "same" idea for it, mine maybe a bit more radical, jejeje

finaly i return to the car and paint it, now start fiting everything need more development of some pieces but is the way tu modify this cars jejeje
some pics

awesome progress!
could you tell me a little more about the HSD coilover? as in how did you fit it to the volvo hub? i've just built a set for mine using ebay coilovers but all i did was replace the volvo damper housing with the coilover tube (over simplified description). my friend is going to be buying a set of HSDs for his 360 soon and we'll be bbuilding them to fit - did you just bore out the hub to be big enough to fit the hsd mount in? or did you just cut the "loop" part off and welded on a new mount to the casting? from what i see you've utilized the old (im guessing s13?) mounts then welded that to the hub to allow height adjustment from the spring platform and damper housing itself, like the original design? or is there a bit more to it? i hope that makes some sense - thanks in advance