Derrick the Volvo! Update P47

For drift/rally/builds cars projects, engine conversions etc...
Describe your plans, project(s) evolution, works progress and final result!
User avatar
jon-ovlov
Posts: 1291
Joined: 30 Jul 2010 09:45 pm
Location: Bristol/Birmingham

Re: Derrick the Volvo! (Prop shaft fail)

Post by jon-ovlov »

Ah! Genius! I have some in the car, I'll do that now. Cheers lad! :lol: I should have weighed it to see how much it was compared, but its not the heaviest. It's nice to have a knob that fits in my hand well . . .

TROLOLOLOLOLOLOL :lol: :lol: :lol:
Image
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.
magnumpi
Posts: 1289
Joined: 05 Feb 2008 11:39 pm
Location: Surrey

Re: Derrick the Volvo! (Prop shaft fail)

Post by magnumpi »

My my what a big knob you've got :lol:

Looks quality

Chris, yes my prop did pretty much look like that, think i put pics in my car thread. Well if it was the mounts they have since been replaced so hopefully all will be well.
89 3dr 340DL in Battleship grey with Ultralights and Williams power
Whats the matter with the car i'm driving can't you tell that it's out of style?
User avatar
jon-ovlov
Posts: 1291
Joined: 30 Jul 2010 09:45 pm
Location: Bristol/Birmingham

Re: Derrick the Volvo! (Prop shaft fail)

Post by jon-ovlov »

magnumpi wrote:My my what a big knob you've got :lol:
ha ha! How did I not notice this? Had to be said eh? :lol:

Minor update of the century - I found some poly urethane at uni, and made a shim for the gear knob. Nice tight fit on the lever now. Great. :D
Image
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.
User avatar
jon-ovlov
Posts: 1291
Joined: 30 Jul 2010 09:45 pm
Location: Bristol/Birmingham

Re: Derrick the Volvo! (Prop shaft fail)

Post by jon-ovlov »

Got a replacement prop that should turn up tomorrow off Theo, so to celebrate imminent road goingness again, I tidied Derrick up a little. Handbrake cables done, clean seats and new dymo stickers for the switch panel. Need to re-paint some parts like the wing mirrors and bonnet though, good ol' stone chips!

Image

Image

Image

Image

Image

I thought "ejector seat" looked a bit better than "horn" :lol:
Image
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.
volvosneverdie
*** V3M DONOR ***
Posts: 9143
Joined: 11 Nov 2008 04:22 pm
Location: Newcastle Upon Toon

Re: Derrick the Volvo! (Prop shaft fail)

Post by volvosneverdie »

Lol at ejector seat. :lol:
Looks good man.
Image
User avatar
mattywatsit
Posts: 318
Joined: 04 Apr 2011 07:00 pm
Location: Co.Durham, North East
Contact:

Re: Derrick the Volvo! (Prop shaft fail)

Post by mattywatsit »

Looking good mate! Love the ejector seat button - class! 8)
Evoman
Posts: 1688
Joined: 15 Sep 2010 10:47 pm
Location: Mid Wales

Re: Derrick the Volvo! (Prop shaft fail)

Post by Evoman »

ye ejector seat is funny :) looks very nice!
Image
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: Derrick the Volvo! (Prop shaft fail)

Post by Chris_C »

Have you got a new output shaft yet dude?
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
User avatar
jon-ovlov
Posts: 1291
Joined: 30 Jul 2010 09:45 pm
Location: Bristol/Birmingham

Re: Derrick the Volvo! (Prop shaft fail)

Post by jon-ovlov »

Cheers guys! Glad you like it!

Chris, I haven't unfortunately mate. I need the car tomorrow, so I fitted the prop today. I double checked everything over, and went for a test drive, everything was peachy. It's only for tomorrow though. I'm still on the look out for one though. Why'd you ask? Do you have one? :wink:
Image
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: Derrick the Volvo! (Prop shaft fail)

Post by Chris_C »

I'll have a borrowable one soon ish in the future, but will need it replaced. Thing is, a screwed spline on the shaft will kill the prop splines, which in turn will screw the next shaft spline :s
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
User avatar
jon-ovlov
Posts: 1291
Joined: 30 Jul 2010 09:45 pm
Location: Bristol/Birmingham

Re: Derrick the Volvo! (Prop shaft fail)

Post by jon-ovlov »

yeah. my intention was to replace both at the same time , but since i need the car on the road for, it ll have to suffice. when i find a replacement clutch shaft, ill hopefully have enough dosh to get a custom prop made up. otherwise ill replace both shaft and prop with standard items.
Image
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: Derrick the Volvo! (Prop shaft fail)

Post by Chris_C »

Alright, let me know if you get one in, else I'll try and sort out my tailshaft bearing conversion pdp so you can have this one.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
User avatar
jon-ovlov
Posts: 1291
Joined: 30 Jul 2010 09:45 pm
Location: Bristol/Birmingham

Re: Derrick the Volvo!

Post by jon-ovlov »

Cheers Chris, I'll give you a shout mate. Chances are I'll have it off you, as its looking like I won't find one in the near future, we'll see. What's the bearing conversion you're doing?

The new prop got me to sliverstone and back no problems, so massive thanks to Theo for getting it to me on time! Formula student was the event, only me and 2 of my mates went this year, due to being abandoned by the rest of the team mates at the last minute. They missed out! Fantastic time, out uni didn't come last year either, considering we had 2 weeks to prepare. :D

The paddock and everywhere was open, so I got a load of shots of the car, as well as inspiration for our car that should be built in time for next year. Some of the cars were fantastically engineered. I've never been before so it was a real experience and eye-opener. Teams from as far as AUS turned up, people with army tents, full working bars, army trailers for sleeping in, tour buses, everything was there!

Lots of my car :lol:
Image

Image

Image

Image

Image

Image

Anyway, some FS cars and stuff . . .

Image

Image

Image

Image

Image

Image

Image
These guys came all the way from the gaza strip!! Fair achievement!!

Image

Theres a load more on my photobucket if anyone wants a gander. Loads of alternative fuel cars too, so hydrogen and battery powered etc. Just awesome.

http://s1113.photobucket.com/home/Jonathan_Hawkes/index
Image
Speedy88 wrote: Leave choke on, idling obnoxiously until neighbours peer out windows at the noisy exhaust
Give neighbours thumbs up
Rev engine to 7K
Exit street sideways
Win at life.
Evoman
Posts: 1688
Joined: 15 Sep 2010 10:47 pm
Location: Mid Wales

Re: Derrick the Volvo! (Silverstone & Formula Student P26)

Post by Evoman »

Forumla student looks great, I joined our team but i didnt really like the people (massive nerds) and they didnt seem to do it for motorsport, just to show off how clever they were, I could have read them wrong though aha!. Will try and join again I think when I enter my third year. Did you hear much from Swansea university (not Swansea met) ?
Image
volvosneverdie
*** V3M DONOR ***
Posts: 9143
Joined: 11 Nov 2008 04:22 pm
Location: Newcastle Upon Toon

Re: Derrick the Volvo! (Silverstone & Formula Student P26)

Post by volvosneverdie »

That second pic is fricken epic dude. With a capital "fricken".

Looks ike a boss time was had by all. Cooler than the other side of the pillow.
Image
Post Reply