Excellent, thank you very much!

Do you still have 300 series parts for sale?

Thanks

I do! What might you me after and we'll see what we can do?!
Pete

Hello Pete !

Anything/anywhere/(and annybody:)) perhaps this kind of door cards ?
http://kotisivu.dnainternet.net/arizona ... 0/door.jpg


And for everybody, if you know somewhere could be exactly this kind of cards for sale, please buy them for me

I have been looking for those now about 9 years here in Finland .....

Hello mate, how are you?

I'll certainly keep me eyes open for a set, however I don't think I've every seen such a combination, red, green and blue I know of, but never that in the UK! You never know, the strangest things turn up sometimes!

Pete

petefarrell360 wrote:Hello mate, how are you?

I'll certainly keep me eyes open for a set, however I don't think I've every seen such a combination, red, green and blue I know of, but never that in the UK! You never know, the strangest things turn up sometimes!

Pete

I've seen some in a local scrappers, but the condition was poor and I'm not sure that the top was grey, i think it was the same "gold" as the fabric

When you are down to a shell with it Pete I would like the boot floor with wheel well if it is in good nick.

Cheers

Ok Dai, I'll certainly have one that'll do well. We'll have to discuss exactly where you want me to cut it so you can join it in! One is practically stripped of everything useful, so it could be ready fairly soon.
Pete

Thanks Pete,

I'll only need about 4-6 inches from around the wheel well. One question before you cut it out , What size wheel will fit in the well?

My alloys fit.....15x5.5?

cheers

James

If thats with the 195/50/15's then that will be spot on what I need

It's with a 185/55, but what's 10mm between friends? It's not the most generous of fits depth-wise, but it does go in.

cheers

James

As long as it goes in

Right, I'll get it removed at some point Dai!

Pete

Great. Are you going to the meet on the 10th?