Need a handbrake lever if it's the same as a 340 (it is off the top of my head). Anyone ever adapted C/L and E/W stuff to fit a 3dr?

e/w are different for 3 dr, but I'm short on details - Adam knows about this. I'm sure the c/l could be made to fit nae bother

Mount the motors at the bottom of the door and connect them to the manual handles with bike chain?

If that's the Maccum way, then you go right ahead with your filthy plans

Handbrake lever should be no problem. It does have E/W, but the mechs are wrong (and probably toast anyway...it's been stood...)

Not sure if it has C/L (no battery). I can check...

cheers

James

Cheers James.

And it's spelt MACKEM, thanks Ronald.

filthyjohn wrote:And it's spelt MACKEM, thanks Ronald.

oops , me thinks ownage to the John of filth

Don't forget to check your e-mails for parts requests either

I got one ages ago from you Mr MJ....but not a recent reminder

Never fear, the parts in question are sat on my desk Email me your address...

cheers

James

Hey James. I didn't e-mail you again about the bit as I didn't know you'd started breaking it. Anyway, thanks - e-mail on the way...

Received...I'll reply a bit later

cheers

James

Hey James, are the door pins any good? cause its silly had bad mine are now lol. Also will the 360 ones be a direct swap for the 340 ones?

Cheers Dan

Door pins...i.e. the hinge pins? Last time I checked, they were still available new, at ~99p each...

I doubt used ones are any good at all.

cheers

James

New eh?, Would this be from volvo or autofactors?

Cheers Dan

80p each from the main dealer, I bought some 2 days ago so they're still available. Next day service too.