Page 4 of 12
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 03 May 2010 06:08 pm
by JPB
volvosneverdie wrote:....If shedules dont marry up, i dont mind holding stuff at the coast for JPB if its any help.
Ta for that, however I'm pretty flexible as long as I don't have to be anywhere before noon.

Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 03 May 2010 07:53 pm
by SteveP
Just got back and checked on this thread... yeah, I meant the Renix unit but if it doesn't have one not to worry! Wing repeaters/indicators might also be good.
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 05 May 2010 12:01 pm
by JPB

Hello Raymanboy, still in the piano trade are we?
Just checked my 340 for wormholes, couldn't find any, do they affect the fitting of bits of exterior trim and driver's seats?

Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 05 May 2010 12:03 pm
by volvosneverdie
Spam Javalin through your black dead heart, smelly spambot.

Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 05 May 2010 12:59 pm
by foggyjames
volvosneverdie wrote:Spam Javalin through your black dead heart, smelly spambot.

Spam be gone, now...
cheers
James
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 08 May 2010 02:58 am
by Chris_C
Foggy, can you add an early 360arb to my list please. Wishbone fit rather than strut fit, memory tells me it should be 19mm rather than 17 on mine.
Possibly 2 if you have them, but will ring to confirm those diameters
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 08 May 2010 12:34 pm
by foggyjames
I guess the 83 GLT will have one...but the GLS won't, right? There might be another on the saloon at that Adam bought from me, as that was a re-shell from an 83 GLT.
cheers
James
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 08 May 2010 12:42 pm
by Chris_C
The GLS should do, Solomanders old one did from memory. If you could arm yourself with calipers, and have a nosey what diameter they are I'd be super greatful
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 09 May 2010 02:15 am
by foggyjames
Digital calipers aren't a toy I posess at the moment....although I should really buy some. Will do what I can.
cheers
James
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 09 May 2010 03:31 am
by griffo20022
Hey dude, what condition is the Passenger side front wing in on your white 340? Also what sort of monies would you be after for it if in good nick?
Also what sort of money are you looking for on the colour coded white bumpers bud?
Lastly, whats your postcode (PM me if you wish)
Ta'!
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 09 May 2010 10:32 am
by SteveP
griffo20022 wrote:Hey dude, what condition is the Passenger side front wing in on your white 340? Also what sort of monies would you be after for it if in good nick?
I'm guessing it will be sh*t as is the rest of the car it's attached to

(Nessy, bless it)
Foggy - might also be tempted by a spare torque tube
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 09 May 2010 11:46 am
by foggyjames
I think the P/S wing might actually be ok, except that it's been rattle-canned at some point. I'll take a look.
I'm sure a TT is available Steve...especially if you come and remove it
cheers
James
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 09 May 2010 11:46 am
by griffo20022
Bummer if so man, mines getting pretty bad now!

Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 09 May 2010 05:18 pm
by macplaxton
foggyjames wrote:Digital calipers aren't a toy I posess at the moment....although I should really buy some.
They were on offer in Lidl the other week. 8.99
Re: Foggy's scrappage scheme - breaking 3 300s
Posted: 09 May 2010 05:31 pm
by foggyjames
Bargain! I'll have to see if they still are...
cheers
James