i was thinking i would half fill the tank 98 and half 95 make a blend of about a 96-97 depending on money and price of petrol and 98 if it all goes well

Well if you're feeling cheap yeah could do that. Do some trial and error to find what suits you, you'll only loose say £5 in the long run if high octane turns out to be no better than 95.

oil ewww

engine bay:)

my splash grad was missing a bit

so i went OVER bourd with mecarno

my one and only bit of rust:(

ill fix that when i take windscreen out to get a new one
patched exorst it was done when i got it

this is the rubber boot off the steering rack:(
dose any body know if i need a new one to get a roady?

whats missing?

is it the air con?
my lead light fits perfictly in the front wheel arch

yer im pretty sure do need a new steering rack boot for roady... i have the same problem at the moment lol

Yup, the belt for your air-con pump is missing. Shouldn't think it'll harm the car though...

Quality bodge with the meccano btw.

That's three of us that need new steering-rack gaiters! This countrys' rotten roads hey??

Hiya

I would like to second this

whiskeyonesix wrote:
Quality bodge with the meccano btw.

Spashguard pretty wrecked on my 360 as the oil filter is removable by bending back the guard My first car was a 1.7 and the filter is nowhere near the gaps in the guard so took whole guard off at oil change times

mickt

ok i finely did some thing i put the brakes back to gether:)
and got the windscreen out but i broke one part of the wether strip:(
but every thing else came out pretty smooth i cracked the screen but it stayed in one peace

my buddy charlie who helped me out today


the rust:(

the rubber that was left and then after i cleand it up


the windscreen


my buddy charlie and my girly friend shelley
chilling in the car he is checking the contackts coz my horn died
and she is drawring

hi guys the other day the bonet was open and i realised that there was a lead that looks like an earth hanging there its just near the radiator bottle and window washer bottle on the inside close to engine and its about 20 cm long any idea where it should conect?
ill post a pic
later on

but i cant for the life of me figure out where it goes?

ok well this is the only pic i have at the moment but the wire that goes across the circle is the one i am talking about and where the star is, is where its atached.???

I think that's an earth lead that runs off the rocker cover nut (Just below the "L" you'll see what I mean....) It should just about reach but it'll be tight. It came loose on my 360.

ok ill investigate tommorrow after work thanks for the help

ok well i sanded it back and it looks alright i need to buy some rust nutrelizer and some paint

all the stuff i went and bought today
castrol super dot 4
rust converter
tuch up paint witch looks like it will match very well acourding to the cap but have not sprayed it on any thing yet
also putty a wire brush and etch primer
oh and a kingcrome 1/2 inch drive witch is awsome!!!!

this is it all cleaned up

am i going to have to weld in a new bit of metal?
or can i just putty and paint and pretend its ok