As title I am looking for a vario fly wheel from a 340 or volvo 66 let me know if you have one

I believe I have one of these tucked away somewhere. It's the mega-dished one to accomodate the centrifugal weights isn't it?

filthyjohn wrote:It's the mega-dished one to accomodate the centrifugal weights isn't it?

That's the clutch cover.

I think he wants the flywheel.

Yes Mac it is the flywheel i am after, I think it dose have some dish from memory but it is a long time since i have seen a late model flywheel and clutch they have all been early shoe clutched i jhave done lately so i could be wrong

it's about 3 or 4 cm thick and looks like this: Stefan, does that engine have Renix ignition?

if you can't get hold of a non-Renix flywheel, you might want the bellhousing of a 1.4 CVT with renix to accomodate with the renix flywheel, i don't think there is enough space for the thicker Renix flywheel in the old type bellhousing.

It will be fitted to a renault K7M 1.6 8v engine in Daf 66 and will use a generation 1 clio ignition which i belive is renix so it sounds like i need a late vario fly wheel and bell housing, more parts needed then

Hi as title change says i need late model Renix Fly wheel and bell housing as well as fly wheel sensor renix unite and all wiring to go with it, would consider parts, all in one car or full scrap car if price is ok.