Page 1 of 1
LSD
Posted: 03 Dec 2010 10:25 pm
by bebbinator
hi do any of you guys and gals know wether you can buy a limited slip diff for a 340 1400.
thanks
Re: LSD
Posted: 04 Dec 2010 06:52 pm
by jon-ovlov
noting as far as im aware. if so ive never seen one! weld that diff!

Re: LSD
Posted: 04 Dec 2010 09:27 pm
by pyro
there were a few made, but very rarely seen and are probably better refered to as a legend.
Ive never seen one, and ive only heard of one person finding one!
Ben
Re: LSD
Posted: 05 Dec 2010 03:07 pm
by sven360
Ben,i'd swap my spare for a Husky 372.XP obviously
Oh and heated handles for the cold,thanks mate

Re: LSD
Posted: 06 Dec 2010 12:30 am
by Ride_on
Read an old thead by Foggy, he says you can get them made by Quaife or 'a secret contact' for about £500-£600. maybe be on another site, google it!
Re: LSD
Posted: 11 Dec 2010 12:10 pm
by bebbinator
jon-ovlov wrote:noting as far as im aware. if so ive never seen one! weld that diff!

welded diffs ar no use in a road rally car mate
Ride_on wrote:Read an old thead by Foggy, he says you can get them made by Quaife or 'a secret contact' for about £500-£600. maybe be on another site, google it!
thanks mate i might speak to Foggy
Re: LSD
Posted: 11 Dec 2010 12:52 pm
by sven360
There was talk of Dana 30 being suitable.
It's found in front axle of Classic shape Cherokees,ie pre 2001.
Might be worth looking into.
If it can be made to fit lockers are available and ring and pinions a plenty.
It'll involve quite a bit of work,I'd imagine.
Re: LSD
Posted: 11 Dec 2010 03:31 pm
by jon-ovlov
bebbinator wrote:
welded diffs ar no use in a road rally car mate
Ah, my bad. Assumed you were drifting it!
That quaife info is interesting. Might ring them up next week and enquire . . .
Re: LSD
Posted: 11 Dec 2010 04:18 pm
by sven360
Think they were 600 each minimum order 10 iirc
Chances of finding 6k on here-minimal I'd have to say.
You can buy a lot o' weld for 6k

Re: LSD
Posted: 13 Dec 2010 10:56 pm
by pyro
sven360 wrote:Ben,i'd swap my spare for a Husky 372.XP obviously
Oh and heated handles for the cold,thanks mate

its a husky 357xpg with heated handles (i think the "g" stands for that!)
Ben
Re: LSD
Posted: 13 Dec 2010 11:16 pm
by sven360
Tis indeed,Ben,got mesel a new 357XPG last yr.
Powerful midrange saw-did you upgrade your ppe,if you check chain speed it takes it to24/26ms all my protection is 20ms.
Hey ho,hope a chain doesn't let fly.

Re: LSD
Posted: 27 Dec 2010 12:25 am
by pyro
IIRC most PPE wont cope with a chain fling anyway, i think they rely on you not aiming to cut your leg off and youll let off the loud button when you get near your leg!
i think im at 24 m/s full speed is at 60 m/s
fun times!
Ben