Page 1 of 1
New parts?
Posted: 23 Jun 2005 10:15 pm
by petavius
Does anybody out there in 300 land know of a reputable U.K supplier of new Volvo parts? I had a chap look at the car today regarding the rust issues and while he can do it he says I need a new rear leaf hanger to replace the knackered one!!
Cheers
Gem.
Posted: 24 Jun 2005 02:27 pm
by V6 Man
I have a nasty feeling that such items will only be available from Volvo themselves. Some bodypanels like wheelarches etc are available aftermarket, but I doubt something as specific as a rear spring hanger for a 300 series has enough demand to warrant a pattern part being made.
Is the existing hanger not reparable, or is it that it would be easier to fit a new one?
Posted: 25 Jun 2005 01:28 pm
by petavius
Bit of both i think, the one or ones there are quite knackered so it would take less time and work to just put new ones on. I have had an answer from Braydon Motors who i've used before but im not sure how many i need, they say there are 2 on each side of the leaf spring on each end so that makes 8 in total but as its only the back that has gone does that mean i need 4?? I think i'll send them a photo to clarify!!

Posted: 26 Jun 2005 07:29 pm
by petavius
This is the problem as some of you have seen:
I need the bits in green and maybe the red bits too?!

Posted: 26 Jun 2005 07:44 pm
by V6 Man
According to VADIS the red bits are 'shackles', 2 per spring, part no 3100884. The green bits are 'spring braces', 1 per side, part no 3267522.
The brace to shackle bush is part no 3100556 and the brace to spring bush is part no 3100100
Posted: 26 Jun 2005 07:47 pm
by petavius
God you're good!!
Posted: 26 Jun 2005 07:54 pm
by V6 Man
Ermm, yes.........well.........modesty forbids of course...........but so I have heard..........
There only two shackles per spring as the front of the spring is mounted differently.
Posted: 26 Jun 2005 07:59 pm
by petavius
Thanks, at least I know what I'm asking for now...I think!
Posted: 27 Jun 2005 12:25 pm
by 5lab
you might persuade solomanda to get them off the 360 he is breaking?
Posted: 01 Jul 2005 06:15 pm
by petavius
Not having any luck getting these bits! Can anyone suggest anywhere to try?
