Page 1 of 1
rims - URGENTLY need replies!!!
Posted: 17 Oct 2006 08:03 pm
by A M R
hi im thinking of buying some 13x7.5 rims for either the 340/360 im going to get. i have seen the rims on ebay and theres only an hour left!!!!! (they are perfect)
well i need to know if a 4 inch pcd will fit onto this car???
thanks for all your help.
Posted: 17 Oct 2006 08:21 pm
by sven360
4 inch= 101.6mm if my maths are correct
Volvo =100mm
So there's 1.6mm difference- not alot in my humble opinion.
I think others have run 'em but don't know how they got on.
Sorry can't be more help.
Posted: 17 Oct 2006 08:22 pm
by stevenc75
4 inches is roughly 100 pcd, right?
Posted: 17 Oct 2006 08:34 pm
by A M R
i think roughly but as the guy above you said there was a 1.6mil difference...
would they still fit?
edit: oh yeh sorry i made a mistake
the auction finishes tomorrow, not today oops
Posted: 19 Oct 2006 08:11 pm
by classicswede
The PCD should fit no probles proved the hole sizes are the same. 1.6mm in PCD is not much at all so it should clear the studs ok.
Posted: 19 Oct 2006 08:13 pm
by SteveP
More minilites!?
Posted: 19 Oct 2006 09:57 pm
by A M R
ah no sorry dont worry about this now - they went out of my pricerange lol.
no they werent minilites, they were lightweight 3-piece compomotives
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :B:EF:UK:2
pretty nice.
i was thinking of painting them black and then getting the face diamond cut and the lip polished
Posted: 19 Oct 2006 10:10 pm
by SteveP
Pimp... very damn pimp... dish anyone?!
Posted: 20 Oct 2006 12:23 am
by Chris_C
Sweet as! Shame they went so high, I'd have loved to have seen how they looked
Posted: 20 Oct 2006 08:15 am
by redline
if they fitted vauxhalls they would fit your volvo ,
I was running vauxhall rims on the redline
Posted: 20 Oct 2006 09:44 am
by Nick C
redline wrote:if they fitted vauxhalls they would fit your volvo ,
I was running vauxhall rims on the redline
A lot of Vauxhalls have the same 4x100 stud pattern as the 300s
Posted: 20 Oct 2006 11:45 pm
by A M R
Posted: 20 Oct 2006 11:52 pm
by Chris_C
All apart from the minilites for me, those compomotives look tasty... alleycats are tight, borbet are close to the Haas 400 rims Steve has, so we know they'd look tight too.
Hmmm, how many student pennies left for those comps...
EDIT: Just looked at the pcd... I make that about 15mm out
Posted: 21 Oct 2006 12:13 am
by A M R
^^ oops didnt see that