Hi guys ! Today I have some time to spend in the 360 and those are the results... Very ghetto but cheap !! 29.90 EUR the shocks in ebay and no more !!



Oh no man !



Yess !



And the final results...





The response is a lot better, but Stage 2 will be a real springs from classicswede... Those are now a bit short and sound a clonk noise when transfer the weights. It's normal I guess, I never reach this level of ghettyness before !!

Greetz from Spain !!!!

Well it looks great, not sure how practical it is that low anyway. At least you'll get an idea of how low you want to go when you do it properly

Looks a lot better just needs stiffening up a little I bet

I have been waiting for a decent picture of 300 series front shocker inserts for ages, now I have seen one.

Almost identical to the inserts on Cavaliers, Calibras and Astra Mk3's (same design), with a few mods they would work a treat, available in adjustable etc.... and plenty kicking about S/H.

P.S very low 300, sweet!!

Johnny A wrote:
Almost identical to the inserts on Cavaliers, Calibras and Astra Mk3's (same design), with a few mods they would work a treat, available in adjustable etc.... and plenty kicking about S/H.

I was waiting to see them because I think the same as you. I'm sure that exist a lot of inserts you can put into and make them adjustables, etc etc...

I'll take notes for the stage 2

Regards !!

There is few measures from dampers if those are what someone has been missing

http://www.janiervast.com/kuvat/index.php?dir=iskarit/

The cav ones are a little to long to fit in. Been there tried it