Yes guys, I'm decided to put a pair of old school webers in my B200E...

This post is specially for the scandinavian guys over here, I'm searching for a used manifold for twin webers on ebay and everywhere and I find nothing... Maybe you can take a look on your local classifieds for one of this

I've found one new redline manifold for twin 40 DCOE webers on a norwegian shop for around 285 EUR... If some of you know about a used one I'll be very happy

Thanks a lot !!!!

Hmm.. There's one guy here who makes intake manifolds for twin carbs for kinda cheap price, I'll try to look up his contact information.

Then there's of course KG Trimning, but their price is around ~200 euros.

KG trimning has splitted and solid models.


http://www.kgtrimning.com/insug.htm

Splitted model costs 2095 SEK which is about 226 euros and the solid one 1795 SEK which is about 194 euros.

I might be able to sort something out. Will have a look on saturday for ya? What sort of money are you looking to spend as this is a new old tock item.
Adam

blocket.se is a great place to search:
http://www.blocket.se/vi/8136069.htm?ca=1_10_s

http://www.blocket.se/vi/12874184.htm?ca=1_10_s

You should just buy this one, 180bhp:
http://www.blocket.se/vi/12880975.htm?ca=1_10_s

For b20, does that fit the b200 head?
http://www.blocket.se/vi/12874184.htm?ca=1_10_s

wow, thanks a lot !!

That setup for 4700kr is more or less what I'm looking for, but I don't think to spend that money so quickly

If a new manifold cost less than 200 EUR new, a good price for a used one would be 120 EUR max I think

Now I know where to search...

Greetz from Spain !!