Spotted this, might be useful to someone after a rear axle?

A global place for general discussion (Volvo, V3M or non-Volvo related topics).
Please introduce yourself here, your Volvo 300 hobby...
NO technical support, parts requests or car advertisements here
Post Reply
340LE
Posts: 54
Joined: 10 Sep 2007 08:45 pm
Location: Kent, England

Spotted this, might be useful to someone after a rear axle?

Post by 340LE »

Richard
User avatar
SteveP
*** V3M DONOR ***
Posts: 7943
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Post by SteveP »

Need a login to view :(
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
User avatar
filthyjohn
*** V3M DONOR ***
Posts: 2693
Joined: 12 Sep 2006 09:07 pm
Location: Sunderland, Ringpiece Of England

Post by filthyjohn »

This is what it says:

1031 volvo axle lsd with pics !
VOLVO axle 1031 later 1987 model witht the twin ribs in the diff housing and the larger bearings on the crown/pinion.
It has 3.72 ratio m30 with 27 spline shafts anda lsd.using a dana powerlock . ( much stronger)
Its out of a 245 1987 volvo B230E.
It has a electronic sensor in the diff cover for a electric speedo but this has been replaced with a atlas one they are a direct fit .
It has exellent discs on (not very old) and new pads at same time. inc are the handbrake cables too.

Contacted S.A.M Volvo motorsport specialist in Sweden who asked for part no of crown wheel (384715-41-11 PO5)
And a picture with cover off they confirmed the above to be correct and quite rare.
Its 54 and1/2" hub face to face.
Also have the prop for the yoke if needed ( calipers too)

Asking £125.00 for it !

DIDDY on 07952327677.

Image

Image
'87 Nissan Sunny
'95 945 LPT
'90 340 3dr
'87 360 GLT
'87 765 TIC
'75 Manta A
'70 Rover P5 V8
'67 MGB GT
'62 amazon 2dr
dalahare
Posts: 291
Joined: 17 Feb 2006 01:51 pm
Location: Melbourne, Oz

Post by dalahare »

Can't fit that to a 300 can you? are the internals good to us or something?
User avatar
SteveP
*** V3M DONOR ***
Posts: 7943
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Post by SteveP »

Not sure what's so special... they were fitted to Torslandas werent they?!
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Post by Chris_C »

If they were... Torslanda's arn't that common anymore, I've seen 3 or so this year. I really don't know much about diffs, but isn't it the 1031 that the guy on 300power fitted into the 300 diff casing? No idea of the difference between the 1031 and the 1030.

Nice ratio too, and not a bad price, shame we wouldn't want the rest... offer him a tiny fraction of the asking price for a tiny fraction of the axle ;)
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
User avatar
SteveP
*** V3M DONOR ***
Posts: 7943
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Post by SteveP »

Torslanda's aren't exactly rare either though...
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
User avatar
Fuse
Posts: 1364
Joined: 29 Jul 2004 09:03 pm
Location: Finland
Contact:

Post by Fuse »

1031 is a bit stronger than 1030, but 1031 isn't TOO rare, it can be found on many 200- and 700-series. Our 240 has a 1031 with Dana LSD. :P
Volvo R-Sport - Equipment for the car enthusiast.

“Buy land, they're not making it anymore” - Mark Twain


"There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games." -Ernest Hemingway
User avatar
jtbo
Posts: 5805
Joined: 23 Jul 2004 03:50 am
Location: Finland, middle of nowhere
Contact:

Post by jtbo »

That thing should fit nicely to my 200 :P
Volvo 360GL -88 -under restoration-
Volvo 343DL vario -81 -running- Image
Volvo 240 Diesel -83 -undecided-
Citroen ZX Dturbo -97 -daily- ImageImage
Post Reply