Volvo 360 bits..(Turbo)

Post by **xtrmjks** » 12 Nov 2008 02:03 pm

Selling some unwanted parts from My 360 16v Turbo..

-Front suspension (whole legs) £250
Coilovers (std. inserts, Bilsteins sold)
285mm drilled discs with willwood dynalites and EBC Yellow stuff pads
braided lines
adj. camber top mounts

-Complete rear axle £200
Disc conversion
braided lines
2" lowering blocks
inc. springs, brackets etc.

-fuel tank (modified) £50
foam filled, modified feed
No fuel starvation issues with this even on track!!

-15" OZ wheels with near new road legal slicks £150
Volvo fittment

..more to follow!!

..More to follow

Post by **pistonpen paultje** » 12 Nov 2008 02:56 pm

Could you make some pictures of the front susp.? I really like to have those!

Post by **xtrmjks** » 12 Nov 2008 03:28 pm

Will post pics next week..

also

-Safety Devices cage £100

-Compomotive ML 8x15 et15 £450
Toyo 215/40 15 tyres
made for 360 +MINT+

Post by **Frits** » 12 Nov 2008 03:46 pm

Where are you located mate?

Considering about driving from holland...

I am interested in
-Cage
-Complete coiloverset

I'm able to buy them in short notice. Is the cage undamaged?

Can you PM me your phonenumber?

Post by **xtrmjks** » 12 Nov 2008 03:54 pm

I'm in midlands, near Coventry..
Rear coilovers are also available

Post by **xtrmjks** » 12 Nov 2008 03:56 pm

Sorry, cage is perfect. Slight modification made to rear tubes (main hoop to floor) by previous owner, will post pics..

Post by **Frits** » 12 Nov 2008 04:10 pm

It's a bolted cage right? Do you think it would fit in the trunk of a peugeot 205 without the rear seats?

Its quite a drive. Maybe anyone here driving from england to the other continent for some reason?

Post by **xtrmjks** » 12 Nov 2008 04:14 pm

cage is bolt in type. It will come in two parts, so I can't see why it would not fit in Pug..

Post by **cheshire190e** » 12 Nov 2008 04:54 pm

Hi, does the modified fuel tank have an intank fuel pump or just the tank?

cheers

Post by **xtrmjks** » 12 Nov 2008 04:59 pm

tank is using Walbro type external pump

Post by **cheshire190e** » 12 Nov 2008 05:00 pm

ah ok no worries then, cheers

Post by **Chris_C** » 12 Nov 2008 07:25 pm

Argh.... just after I bought my half cage! Actually, out of interest, do the front legs on yours separate from the b pillar section?

Frits, do you want *all* the cage

it'll fit in a 205 easier if there's less of it

Post by **xtrmjks** » 12 Nov 2008 07:31 pm

rear cage is separate from front, ie bolts on to rear

Post by **Chris_C** » 12 Nov 2008 07:35 pm

Ok, I'm very interested in the front, I understand you'll want it gone together, so anyone want the rear? I also understand Frits has first mention, so I'll let him have a think.

SD sold the rears standalone for those who are wondering, which is what I have.

Post by **kaos** » 12 Nov 2008 08:01 pm

asuming cage would ift a 340 no problems i could be intrested in all or just the rear section...