Handle coating

Rust problems and repairs, leaky sunroof... Battery, starter, lights, fuses, airco, heating unit, stereo... | Tuning: custom spoilers & bodykits, fiberglass parts...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Olafito
Posts: 47
Joined: 12 Mar 2005 11:46 pm

Handle coating

Post by Olafito » 22 Oct 2022 09:25 pm

The four doors of my car has their handle coating destroyed and water comes into the door in rainy day or when I wash the car.
Any solution? I saw a 340 in a scrap yard but the handles were in the same condition, I don't know if I should look for the entire piece or just the coating

Image
Image
Image

User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: Handle coating

Post by Chris_C » 23 Oct 2022 11:07 am

Born Built Beauties organised a remanufactured part for doorhandle seals years ago and they are a very good quality item and fit, link below:

https://www.born-built-beauties.eu/html ... html#parts
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast

Olafito
Posts: 47
Joined: 12 Mar 2005 11:46 pm

Re: Handle coating

Post by Olafito » 23 Oct 2022 01:42 pm

Thank you very much, as I can see there are two kinds of handles , depending on whether the door is front or rear, true?

volvomania
Posts: 641
Joined: 09 Aug 2005 02:24 pm
Location: Antwerp, Belgium

Re: Handle coating

Post by volvomania » 02 Nov 2022 11:31 am

The actual handles are different per door (left and right hand side front (with a lock) and left and right hand side rear (without a lock) ), but the seals in between the door and the door handle are identical.
Life is a journey, so sit back and enjoy the ride!

Born Built Beauties: Parts keeping our cars on the road!

http://www.Born-Built-Beauties.eu

Olafito
Posts: 47
Joined: 12 Mar 2005 11:46 pm

Re: Handle coating

Post by Olafito » 23 Jan 2023 05:07 pm

Now I need this part of plastic to seal the front glass, the one I have broke when changing the glass

Image

Image

Image

Post Reply