shouldnt this be in the OFF TOPIC thread ? !!!!Chris_C wrote: after years of not planning too...you don't want things to go floppy at the crucial moment.
Driving Light Brackets
-
antiekeradio
- Posts: 697
- Joined: 04 Jan 2004 10:53 am
- Location: roosendaal - netherlands
- Contact:
well i spent 5 hours in the freezing cold fitting my brothers cibies last sunday and it was no problem if you have good brackets. the brackets we used you can even have 2 up 2 down if you want. they are basically a T shape and bolt onto the bumper with a spacer kit to fit between the bracket and bumper in the front section. you have to drill your bumper though, 6 x 10mm holes in plasic and steel section of bumper + 2 x 25mm hole in plastic at the front top left and right of nuber plate . i wired each spot[only2 not4] with its own relay and fuse and loomed all the cables through a grommet next to the radiator and mounted all cables onto sticky pads with tie wraps etc. a proper job . 2 x 130w cibies light up the lanes sweet as !!
Y + A plate both 1983 & D plate 1987 3door 360 Glt's
