340 head unit wires

Post by **340 Nate** » 07 Jul 2007 12:59 pm

hi all just got a din connector which i have to wire up to where the old connector was, problem is ive just looked high and low for my haynes manual and its gone missing

, could anyone tell me what the 2 brown wires, 2 red and black wires, and a green wire do?
took a pic of it just incase

cheers

nate

Post by **fume** » 07 Jul 2007 03:03 pm

The green wire is the permanent live, the two browns are earths and the other two are the speaker wires.

Post by **340 Nate** » 07 Jul 2007 04:47 pm

hi there, cheers for the help, i think the speaker wires are the grey and black ones u can see just about, or unless theres more wires, did try it that way but didnt work, made my dash stop working including revcounter

, can still indicate and flashes on the dash left or right indicating but somethings gone now :S , all fuses are intact i think

cheers

nate

Post by **340 Nate** » 08 Jul 2007 12:32 am

well i got my dash working again thankfully and i did finally get my head unit and speaker fitted with cable ties

cheers

nate

Post by **Tourinki** » 08 Jul 2007 08:22 am

erm.. That's different...

Post by **340 Nate** » 08 Jul 2007 03:31 pm

all in all it cost me nothing for speaker n stereo unit so i thought why not

lol

nate

Post by **redline** » 08 Jul 2007 04:38 pm

love the wood rim wheel mate

Post by **Chris_C** » 09 Jul 2007 01:12 pm

The black/red and the green are both +12, although one is the switched ignition, and the other permanent. Can't remember which way round though

Brown is earth.

Post by **340 Nate** » 09 Jul 2007 09:05 pm

yea i used a volt tester thing and eventually figured out i shouldnt split those red and black wires as it stopped my dash working

, all sorted in the end

cheers

nate