1.7 PAS stuff

Rust problems and repairs, leaky sunroof... Battery, starter, lights, fuses, airco, heating unit, stereo... | Tuning: custom spoilers & bodykits, fiberglass parts...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

1.7 PAS stuff

Post by Speedy88 » 28 Oct 2009 01:02 pm

I always thought it would be cool to do a custom PAS job on a 1.7 with some 360 parts. Tricky even thinking about it though!
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project
Top
volvosneverdie
*** V3M DONOR ***
Posts: 9143
Joined: 11 Nov 2008 04:22 pm
Location: Newcastle Upon Toon

1.7 PAS stuff

Post by volvosneverdie » 28 Oct 2009 01:07 pm

^^ go for it man.
PAS parking rocks.
Image
Top
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: Volvo 360 GLT 3 Door Mk2 in dark red <BACK UP FOR SALE £600>

Post by Chris_C » 28 Oct 2009 01:29 pm

Rumour mill says the PAS rack doesn't fit under the 1.7 sump. It does under the 1.4 certainly though.
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Top
User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: Volvo 360 GLT 3 Door Mk2 in dark red <BACK UP FOR SALE £600>

Post by Speedy88 » 28 Oct 2009 06:58 pm

I wounder how many variations there are though. I mean, surely the 440 has PAS? Chances there to get some parts that would simply bolt on. What I need is a long hard look under the bonnet of a 440..
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project
Top
User avatar
Chris_C
*** V3M DONOR ***
Posts: 9600
Joined: 18 Jun 2004 11:53 pm
Location: South Coast, UK

Re: Volvo 360 GLT 3 Door Mk2 in dark red <BACK UP FOR SALE £600>

Post by Chris_C » 28 Oct 2009 10:21 pm

The sump for a 400 is different ;) So the rack is still your issue. Bracketry fouls the 300 mounts from memory, but the pump and pulleys are what you need.

I'll split this from Ronnies thread ;) EDIT - No, I can't, it's not working. Can another mod if I can't get back to the internet please
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Top
User avatar
SteveP
*** V3M DONOR ***
Posts: 7943
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Re: 1.7 PAS stuff

Post by SteveP » 28 Oct 2009 11:33 pm

How about some sort of adaptation from an electric PAS system? Custom car builders are increasingly using these, for example out of 2000ish onwards Vauxhall Corsa's
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
Top
monka
Posts: 178
Joined: 11 Oct 2009 02:06 am

Re: 1.7 PAS stuff

Post by monka » 28 Oct 2009 11:41 pm

yeah surely if somehow can get a rack to fit, an electric pump from a 106/saxo would fit
Image
Top
User avatar
pistonpen paultje
Posts: 358
Joined: 24 Jan 2007 07:53 pm

Re: 1.7 PAS stuff

Post by pistonpen paultje » 29 Oct 2009 08:56 am

The pump is not a problem. As there are lots of F-type renaults with pas. But the rack does for 100% sure does not clear the sump. I know cause I tried...! :mrgreen:
Image
Top
User avatar
Speedy88
Posts: 4057
Joined: 04 May 2009 11:52 pm
Location: Bristol

Re: 1.7 PAS stuff

Post by Speedy88 » 29 Oct 2009 05:14 pm

Interesting, could go electric. The rack's easy to fit, bit of duc tape here and there... no problem!
'88 340 Williams (Sold)
'85 360 GLS - Drift project (Sold)
'77 Colt Sigma
'96 940 Drift project
Top
Post Reply

Return to “Bodywork, interior, electrical equipment, accessories”