Which engine for 1.4?
Which engine for 1.4?
Just wondering if anyone could give us a hand. basically got a 1989 b14.4e and have blown the engine up
and was wondering what other engine will go in eg from clios or other renaults etc without messing about with loads of wiring, exhausts, fuel pumps etc? need a quick fix for it
and unfortunately there dont seem to be many 340's up here in scotland in breakers yards etc. cheers.
-
macplaxton
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: Which engine for 1.4?
Where are you in Scotland exactly Gordon?
What exactly do you think you've blown up?
What exactly do you think you've blown up?
Re: Which engine for 1.4?
in glasgow. not had the head off too look but there was a terrible rattling sound then the engine stopped, removed the spark plugs to find number 4 squashed and when turning it over the contents of the radiator emptied themselves through the number 4 cylinder lol so obviously the head gasket has gone but why the rattling and squashed spark plug? also the car wasnt overheating at the time or anything.
-
macplaxton
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: Which engine for 1.4?
I've got a 1.4 engine in Carlisle - would need the clutch/flywheel etc removing as it's from an auto.
Can anyone say what else is different between manual / auto engines off the top of their heads?
Can anyone say what else is different between manual / auto engines off the top of their heads?
Re: Which engine for 1.4?
took the head off to find this


Re: Which engine for 1.4?
hmm yer that might be your problem lol
but how did the radiator stuff get in the combustion chambers technically thats imposable
hmm
but how did the radiator stuff get in the combustion chambers technically thats imposable
hmm

- 340GLT
- *** V3M DONOR ***
- Posts: 3657
- Joined: 31 Mar 2005 09:01 pm
- Location: Shropshire & Swansea, UK
- Contact:
Re: Which engine for 1.4?
I have a low mileage engine out of tommyb's car only done 35k. Can have it palleted for around £60. He is after £80 for the engine.
Adam
Adam
F559 LFE - 340R 2.0 16v
C208 CTR - 340 1.8 16v
D300 LBO - 360 GLT 3 Door Turbo project!! (and restoration)
F706 RBX - 350R in process!!!
C208 CTR - 340 1.8 16v
D300 LBO - 360 GLT 3 Door Turbo project!! (and restoration)
F706 RBX - 350R in process!!!
-
macplaxton
- Posts: 3283
- Joined: 09 Feb 2008 02:29 am
Re: Which engine for 1.4?
Maybe bits got sucked in by carb. You were playing around with it about 3 months ago? 



