340 1.4 engine change ?

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
Drew V-340
Posts: 16
Joined: 08 Nov 2015 06:41 pm

340 1.4 engine change ?

Post by Drew V-340 »

Hi guys is there any lump I can drop straight into the 340 1.4 without much hassle or turbo options cheers
360beast
Posts: 873
Joined: 27 Dec 2013 08:40 pm

Re: 340 1.4 engine change ?

Post by 360beast »

Renault 5 turbo.

With 1.7 parts Renault F4R, F7P, F7R

Some people even turbo the original engine but you would need to lower the compression.
rob118
Posts: 5
Joined: 22 Oct 2015 05:45 pm
Location: Crayford London/Kent

Re: 340 1.4 engine change ?

Post by rob118 »

Sorry to bring back a old thread but I have a volvo 340 1.7 swapped to a F7R, I know a 1.4 340 can take a 360 power steering rack my question is,

Would I be able to buy a 1.4 340 convert it to power steering then drop my F7R into it? im not sure if the steering rack will get in the way of eanything
winwin01
Posts: 2
Joined: 19 Apr 2017 03:21 am

Re: 340 1.4 engine change ?

Post by winwin01 »

Well, I want to know the same.
rob118
Posts: 5
Joined: 22 Oct 2015 05:45 pm
Location: Crayford London/Kent

Re: 340 1.4 engine change ?

Post by rob118 »

Or would it be easier to get another 1.7 and try and fit power steering to it? If thats even possible because I already have the mounts and everything in my donor car.

Cheers Rob
360beast
Posts: 873
Joined: 27 Dec 2013 08:40 pm

Re: 340 1.4 engine change ?

Post by 360beast »

I would be surprised if the rack did foul on anything.
rob118
Posts: 5
Joined: 22 Oct 2015 05:45 pm
Location: Crayford London/Kent

Re: 340 1.4 engine change ?

Post by rob118 »

Cheers I shall try it once I get a new 340, hopefully once I come back from my holiday and have some spare cash.
classicswede
*** V3M DONOR ***
Posts: 5469
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Re: 340 1.4 engine change ?

Post by classicswede »

What I remember and you will find if you search the forum is that to fit the PAS rack to a 1.7 you need to raise the engine a little.

If that needs to be done you are going to need also ajust the gearbox position to keep perfect prop alignment
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image
Post Reply