Put here your advertisements to sell cars and parts
classicswede
*** V3M DONOR ***
Posts: 5468 Joined: 25 Apr 2005 06:52 pmLocation: Anglesey North Wales
Contact:
Post
by classicswede 22 Mar 2008 12:12 pm
Nikdev wrote: These: Strut top mountings r/d £100 pair
No not the same as stock ones. There is no rubber in them as they are made of steel and use bearing for positive location and smoother steering.
I did buy some rubber ones from Volvo 2 years ago - this parts situation is getting worse!
Nikdev
Posts: 405 Joined: 08 Oct 2006 09:11 pmLocation: Norway
Post
by Nikdev 24 Mar 2008 04:58 pm
classicswede wrote: Nikdev wrote: These: Strut top mountings r/d £100 pair
No not the same as stock ones. There is no rubber in them as they are made of steel and use bearing for positive location and smoother steering.
I did buy some rubber ones from Volvo 2 years ago - this parts situation is getting worse!
You have pm!
Frits
Posts: 725 Joined: 04 Jun 2006 07:58 pmLocation: Netherlands
Contact:
Post
by Frits 15 Apr 2008 10:59 pm
PM with some questions about the springs
Cloud
Posts: 197 Joined: 08 Mar 2008 07:09 pmLocation: Northumberland, UK
Post
by Cloud 15 Apr 2008 11:29 pm
Does anyone know off the top of their heads which parts from the catalogue ill need for a down-pipe back exhaust system? anyone done this?
B Volvo 360 GLT - 2.0i 52k
classicswede
*** V3M DONOR ***
Posts: 5468 Joined: 25 Apr 2005 06:52 pmLocation: Anglesey North Wales
Contact:
Post
by classicswede 17 Apr 2008 01:25 pm
You will need two 2" back boxes some st pipe and a couple of preformed bends. If you are doing a full system you would probably be best with a full ready made s/s one I can do.
griffo20022
Posts: 576 Joined: 01 Sep 2007 03:12 pmLocation: Wolverhampton, UK
Post
by griffo20022 17 Apr 2008 01:51 pm
I know i'm probably doing your nut in Dai but I don't suppose theres any update with the engine mounts are there dude?
'90 340 1.4 Vince!
classicswede
*** V3M DONOR ***
Posts: 5468 Joined: 25 Apr 2005 06:52 pmLocation: Anglesey North Wales
Contact:
Post
by classicswede 18 Apr 2008 01:13 pm
No I don't mind you keep asking. As things look the company I had them from will not be amking them again so I looking for an alternative supply for the mounts.
Phil_h
Posts: 7 Joined: 21 Apr 2008 05:48 pmLocation: Evesham, West Mids
Post
by Phil_h 23 Apr 2008 01:36 pm
Pm sent..
magnumpi
Posts: 1289 Joined: 05 Feb 2008 11:39 pmLocation: Surrey
Post
by magnumpi 27 Apr 2008 10:36 pm
PM sent
89 3dr 340DL in Battleship grey with Ultralights and Williams power
classicswede
*** V3M DONOR ***
Posts: 5468 Joined: 25 Apr 2005 06:52 pmLocation: Anglesey North Wales
Contact:
Post
by classicswede 29 Apr 2008 08:44 pm
Phil_h wrote: Pm sent..
Hi Phil,
not received a PM for you please try again.
Cheers
Dai
kaos
Posts: 1298 Joined: 09 Jul 2007 10:34 pmLocation: Somerset
Post
by kaos 30 Apr 2008 08:03 pm
engine and gearbox mounts?
xtrmjks
Posts: 501 Joined: 26 Feb 2008 07:28 amLocation: midlands
Post
by xtrmjks 30 Apr 2008 08:27 pm
..I'm also after some engine/g box mounts..??
Nikdev
Posts: 405 Joined: 08 Oct 2006 09:11 pmLocation: Norway
Post
by Nikdev 25 May 2008 09:39 pm
Hello Dai, dont know if my pm`s work. How is the fabrication coming along? The car is ready, and I really need those topmounts
kds19
Posts: 366 Joined: 09 Mar 2008 07:33 pmLocation: aberdeen, Scotland
Post
by kds19 24 Jun 2008 07:47 pm
have you stopped selling stuff now????
