Front axle, springs, shock absorbers, wheels, bearings, calipers, drums...NO parts requests here, please use our V3M BUY & SELL corner
J340GLT
Posts: 909 Joined: 31 Mar 2007 06:00 pmLocation: South East London/ Kent
Post
by J340GLT 29 Sep 2008 12:02 am
where can I get these from guys?
Last edited by
J340GLT on 29 Sep 2008 01:13 am, edited 1 time in total.
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up
Bazboy
*** V3M DONOR ***
Posts: 686 Joined: 05 Feb 2008 08:34 pmLocation: Southampton
Post
by Bazboy 29 Sep 2008 12:15 am
best bet is ebay, thats where i got mine from, there is a few stores which stock the escort mk2 stuff, is basically a straight fit but you need to buy straight bolts to replace the u shape ones and then file the top of the block down ever so slightly.
http://cgi.ebay.co.uk/FORD-2-Lowering-B ... 286.c0.m14
Dan
J340GLT
Posts: 909 Joined: 31 Mar 2007 06:00 pmLocation: South East London/ Kent
Post
by J340GLT 29 Sep 2008 01:07 am
cheers for the reply mate..thanks for the link as well very helpfull..
340 DL G Reg 1.4, Vario..3,000Miles on the clock from new!!!National BKV Runners-Up
filthyjohn
*** V3M DONOR ***
Posts: 2693 Joined: 12 Sep 2006 09:07 pmLocation: Sunderland, Ringpiece Of England
Post
by filthyjohn 29 Sep 2008 07:47 am
Make sure you use strong-ass bolts though. Recommend ones marked 8.8 or above.
'87 Nissan Sunny
Bazboy
*** V3M DONOR ***
Posts: 686 Joined: 05 Feb 2008 08:34 pmLocation: Southampton
Post
by Bazboy 29 Sep 2008 09:22 am
Also definitely check that the bolts are on very tight and check after a few miles, two of mine rattled them selves lose. so i used two sets of bolts.
340ovlov
Posts: 186 Joined: 27 Sep 2008 08:50 pmLocation: sideways at a roundabout near you
Post
by 340ovlov 29 Sep 2008 10:18 am
f1moto.co.uk is the place for everything volvo tuning wise
1985 340 1.4 3door
