Front seat, back adjusters

Post by **kelvingenders** » 24 Nov 2013 03:05 am

: back seat adjusters.jpg (113.81 KiB) Viewed 22852 times

Hi guys, just looking for two in good condition. Clearly need to be sent to Brisbane. Will pay of course. Get in touch if you can help. Thanks Kelvin

Post by **MCHUDD** » 24 Nov 2013 12:34 pm

Hi Kelvin.
I have a set of 360 seats and the ajusters were working
when i took them out of the car. I will have a look next week sometime.
Cheers Mark.

Post by **kelvingenders** » 04 Dec 2013 10:25 am

Anyone ...can you help

Post by **Logan360** » 04 Dec 2013 07:10 pm

Good luck mate. I've broken many of these trying to remove them to the point where i swapped both my seats over so i didn't risk breaking more.

Post by **kelvingenders** » 03 Feb 2014 11:55 am

Can anybody help me out?

Post by **kelvingenders** » 15 Feb 2014 04:58 am

Absolutely desperate!!!!

Post by **Logan360** » 17 Feb 2014 07:24 pm

Tried any the muppets on trade me?

Post by **360beast** » 17 Feb 2014 07:28 pm

You shouldn't talk about yourself like that Logan

Post by **MCHUDD** » 17 Feb 2014 09:03 pm

Hi Kelvin.
Is it the plastic bit attached to the metel bit or both?
Cheers Mark.

Post by **kelvingenders** » 18 Feb 2014 12:23 pm

Ill have a look and get back

Post by **kelvingenders** » 19 Feb 2014 10:28 am

Post by **MCHUDD** » 19 Feb 2014 12:16 pm

Hi Kelvin.
I will have another look this week and see what i can come up with.
Cheers Mark.

Post by **Logan360** » 21 Feb 2014 10:58 am

......... you win this round luke

Post by **MCHUDD** » 21 Feb 2014 03:43 pm

Hi Kelvin.
Separating the plastic bit from the metal bit is just about impossible but separating
both from the seat turned out to be quite easy. Just four 13mm bolts. So i have one in working order.
Postage is bad news i am afraid. Approx £14.00 to Aus. Its the weight. However, If it went to England, it
would only be about £4.00. Not so far to travel.
Let me know if you want it.
Cheers Mark.

Post by **360beast** » 21 Feb 2014 08:28 pm

MCHUDD wrote:Hi Kelvin.
Separating the plastic bit from the metal bit is just about impossible but separating
both from the seat turned out to be quite easy. Just four 13mm bolts. So i have one in working order.
Postage is bad news i am afraid. Approx £14.00 to Aus. Its the weight. However, If it went to England, it
would only be about £4.00. Not so far to travel.
Let me know if you want it.
Cheers Mark.

How much does it weigh? I sent 11kg to Logan in NZ for £55 I used parcel2go for the quotes, It arrived with no problems.

Front seat, back adjusters

Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters

Re: Front seat, back adjusters