Hi guys, just looking for two in good condition. Clearly need to be sent to Brisbane. Will pay of course. Get in touch if you can help. Thanks Kelvin

Hi Kelvin.
I have a set of 360 seats and the ajusters were working
when i took them out of the car. I will have a look next week sometime.
Cheers Mark.

Anyone ...can you help

Good luck mate. I've broken many of these trying to remove them to the point where i swapped both my seats over so i didn't risk breaking more.

Can anybody help me out?

Absolutely desperate!!!!

Tried any the muppets on trade me?

You shouldn't talk about yourself like that Logan

Hi Kelvin.
Is it the plastic bit attached to the metel bit or both?
Cheers Mark.

Ill have a look and get back

Both

Hi Kelvin.
I will have another look this week and see what i can come up with.
Cheers Mark.

......... you win this round luke

Hi Kelvin.
Separating the plastic bit from the metal bit is just about impossible but separating
both from the seat turned out to be quite easy. Just four 13mm bolts. So i have one in working order.
Postage is bad news i am afraid. Approx £14.00 to Aus. Its the weight. However, If it went to England, it
would only be about £4.00. Not so far to travel.
Let me know if you want it.
Cheers Mark.

MCHUDD wrote:Hi Kelvin.
Separating the plastic bit from the metal bit is just about impossible but separating
both from the seat turned out to be quite easy. Just four 13mm bolts. So i have one in working order.
Postage is bad news i am afraid. Approx £14.00 to Aus. Its the weight. However, If it went to England, it
would only be about £4.00. Not so far to travel.
Let me know if you want it.
Cheers Mark.

How much does it weigh? I sent 11kg to Logan in NZ for £55 I used parcel2go for the quotes, It arrived with no problems.