Page 1 of 1
Cutting out 2.0i
Posted: 06 May 2010 11:27 am
by wheelbarrow
Hi there. My friends 360 2.0i Keeps cutting out when you go over bumpy ground. It has recenly had new plugs leads dizzy and rotary arm. Just wondered if anyone else has had smilar problems and what there solutions were. Any help would be appreciated thanks
Re: Cutting out 2.0i
Posted: 06 May 2010 11:37 am
by pyro
Heyhey
I would check the ecu mounting, plugs, wires etc. and make sure its earthed properly with no corrosion on earth leads around the ecu cage.
failing that dont drive over bumpy ground
Ben
Re: Cutting out 2.0i
Posted: 06 May 2010 11:45 am
by Chris_C
Aux fuse box, behind battery. The fuel pump fuse in there corrodes and could be loose
Re: Cutting out 2.0i
Posted: 06 May 2010 12:13 pm
by SteveP
Chris_C wrote:Aux fuse box, behind battery. The fuel pump fuse in there corrodes and could be loose
+1 and/or the fuel pump relay
Re: Cutting out 2.0i
Posted: 07 May 2010 12:00 am
by wheelbarrow
Thank you il do a bit of investagation and see what I find