Page 1 of 1

360GLT parts required

Posted: 10 Jun 2011 11:55 am
by swedespeed
Hi there, hope someone can help me. I'm from South Africa & just purchased a 1986 Volvo 360 GLT & as they weren't shipped to South Africa, I'm battling to find some parts. Is there anyone out there that can help me with the following parts:
tail lamp right hand side, direction indicator right hand side, door handle right hand side, a Renix S100941-408A control unit, impulse sensor & finally ignition coil. Many thanks. Markus

Re: 360GLT parts required

Posted: 10 Jun 2011 08:49 pm
by MCHUDD
Hi mate and welcome.
I can do the Tail lamp,indicator stock and door handle.
Cheers Mark. sm4

Re: 360GLT parts required

Posted: 11 Jun 2011 01:36 am
by Ride_on
The renix is pretty reliable are you sure you need a replacement, the coil is replaceable from any unit/car post 83 as is the crank sensor. Crank sensor failure is common. If you have a non-starter try posting the problem. Most common problem is the injector pump fuse contacts behind the battery.

Re: 360GLT parts required

Posted: 11 Jun 2011 08:42 pm
by macplaxton
Some engine type bits you might be able to get from a Renault main stealer.