Ali's drift 360 project
- foggyjames
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
PWN3D!
cheers
James
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
SJS has knock sensing in his B254, I think.
Send PM as I think he is not reqularily scanning this board.
Uups, made spelling error last night, fixed now
Send PM as I think he is not reqularily scanning this board.
Uups, made spelling error last night, fixed now
Last edited by jtbo on 26 Feb 2007 11:56 am, edited 1 time in total.
Lol, well in my defence the parts we are using are such uncommon pin layouts, they don't actually exist in the software
Believe me, I didn't go adding components to the thing cos it seemed a fun way to spend a Saturday afternoon

Believe me, I didn't go adding components to the thing cos it seemed a fun way to spend a Saturday afternoon
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Where did you get yours from Ali? I'm thinking of holding off on the wideband and MS for a few months, but you know when I get it running that'll change 
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
- foggyjames
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
Innovate LC-1? Shoulda told me, a mate is a dealer...
cheers
James
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
Right little update, still waiting for the MSnS to arrive, swapped the turbo injectors onto the car and plumbed up the intercooler to the inlet manifold, might require a little modification for the inlet temp sensor but haven't bought one yet. Tonight I made up the adapter plate for the TPS...






Down to one car shocker! 1994 200sx S14 119k
- foggyjames
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
Nice work Ali! It looks a little more professional than Andy's superior quality bodge

cheers
James
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
- foggyjames
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
It's not just the carbs that smell of fuel...
cheers
James
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
I did made adapter plate from original metal adapter plate that sits under that original throttle switch, just did cut d-shaped shaft and drilled few new holes to adapter plate, very stock like look with that.
If I had installed FP under the car and done wiring properly using original harness there would not been anything to criticize with my install, however my stylish FP install to manifold and open wiring was not too pretty I must say
Here you can see TPS and that rather stylish or perhaps artistic wiring
Click image to see it bigger.
Then I had chav filter at beginning, it flew of once when I floored it and for some reason Renix did decide that it is ok to fire spark now, huge BANG and filter was gone to some better place. That small hesitation was always because of renix, had not that with MS controlled spark and not other problems either.
Ali, study those photos and make notes how not to do things
James, you sure that it is good put that carb fire out with fuel?
If I had installed FP under the car and done wiring properly using original harness there would not been anything to criticize with my install, however my stylish FP install to manifold and open wiring was not too pretty I must say
Here you can see TPS and that rather stylish or perhaps artistic wiring
Click image to see it bigger.
Then I had chav filter at beginning, it flew of once when I floored it and for some reason Renix did decide that it is ok to fire spark now, huge BANG and filter was gone to some better place. That small hesitation was always because of renix, had not that with MS controlled spark and not other problems either.
Ali, study those photos and make notes how not to do things
James, you sure that it is good put that carb fire out with fuel?
Last edited by jtbo on 23 Dec 2012 06:28 pm, edited 1 time in total.




