A global place for general discussion (Volvo, V3M or non-Volvo related topics).
Please introduce yourself here, your Volvo 300 hobby... NO technical support, parts requests or car advertisements here
BIG thanks to Andy who got the MS fitted and running today, was all looking promising until we went to drive it to the MOT station, not even on boost and clouds of smoke out of the back then hit a bump which ripped the exhaust off at the downpipe joint. Managed to get it fixed back on in a random pub carpark but was too late for the MOT and it would have failed on the smoke anyway
Also thanks to Steve for being the backup rescue vehicle and general spannering lol, looks like I better get down the scrappy asap for a new turbo and get making myself a new exhaust system that actually has more than an inch clearance! Should be worth it when its all done anyway!
Oh man, that sucks. FWIW, Ryan's car has just popped its snail too. 13Cs are common enough, and you might eventually like to look for a 15G from a T5....it should bolt right on, and is less stupidly undersized!
If the second turbo also goes ping after a while...you know what I'm gonna say re: oil drain... I certainly hope it's ok for you.
Its gonna be a good one this when we get it working, it already drove pretty well, considering I had only just plugged in a few numbers and had virtually no tuning or tweaking time. Shame about the smoke and the exhaust.
Well thats what i'm wondering aswell James. What doesn't add up is that before it was plumbed in I was driving it up and down my road (making full 7.5psi using that bodge) and there was no smoke at all. After the exhaust came off yesterday it took about an hour to get it all fixed back up, then on the drive home there was no smoke at all until I went to put my foot down. I've got no idea when turbo's are likely to smoke but I did wonder if the oil could be backing up in the drain over time causing the smoke? Just because we let it run for a while before taking it to the MOT and it was smoking straight away then
hope you get a nice turbo on there soon and sort out the oill issue. i'd rather just get a turbo car after the ovlov and then fcuk about from there on.
It may well be passing oil all the time, but you can only see it when it's wound up. Ryan's started with it smoking visibly only on boost, then after a couple of hundred miles it was doing it at idle...etc...
Could just be a fragged turbo...they don't seem to like sitting around - Ryan's was fine when parked up....6 weeks later, was blowing oil.
EDIT: The other option is a rebuild kit, that way you know it's fresh. The rebuild kit for a Garrett T3 with a 270deg thrust bearing is about £60, plus you may want to send it off for balancing / inspection....~£100?
Did you get it running sufficiently to get your toe in? Does it move a bit?
Nah only managed to get to about half throttle at 40mph in 4th, went alright though, I think it should be pretty damn fast when its done but didn't want to do it on a map that we haden't really worked on and with no silencers haha, 3" pipe ftw